Brian,
Will 315 BFG’s fit stock WS6 wheels and would there be an issue with rubbing or hitting the wheelwells? Would I have to have the edges rolled?
Thanks
Shawn
they fit,just run an 1/8 spacer,
how wide is the stock rim?
doesn’t a 315 need about a 10" rim?
9 1/2
oh, 
i wouldnt run anything bigger than a 295 on a stock ws6 rim…too much overhang for my liking…i guess its possible tho
No problems on the street with them? No rubbing or cuts to worry about?
i ran 315 bfg’s on 02 ws6 wheels for a day minor rubbing
nope
we had to massage the inner wheel well to fit a 295 on back of a early 4th gen
and i know of a set of 315s mounted on a 7’’ rim 
Ok… I guess I’ll go the safe route and order the 275’s. Don’t want to get the 315’s and have any issues and it seems there is a possibility of it. Thanks for the replies.
run 315’s ,topless ta did on a vert!
hmmm didnt know u could…i might have to do this
Maybe next set. They’re already on their way.
when i had 315’s on my car i ran a 1/8" spacer, and used a bfh to pound in the inner wheelwell, and got jounce jumpers off brian. An adjustable panhard bar wouldn’t hurt either.
Chicken :scared: :burnout: