RidinDirtyCrx's Build Thread (Now Running)

Builds
1

http://img294.imageshack.us/img294/8683/prepwork006ta7.jpg
i bought this car about a year and a half ago with the intentions of throwing it together and be driving it in months. well that didnt happen. but i had a good start for a project. it was an auto but i fixed that already
http://img440.imageshack.us/img440/4927/prepwork012ud2.jpg
got her in the garage to finally start working on her again
i have a D16A6 and an Si Trans on its way for the power plant and i am gettin a gas tank and a fuel pump for it to. i have very strong intentions to boost in the near future. but just gettin it running has been a big project.
i took the valve cover off of one of the D15b2’s i have and i sand blasted it at school and i grinded all the letters off to so i could paint it black
http://img154.imageshack.us/img154/9258/prepwork002ya6.jpg
http://img294.imageshack.us/img294/6377/prepwork007lq9.jpg
starting to look better
Next step-The Hood
http://img440.imageshack.us/img440/4756/prepwork005cn7.jpg
the hood was new but never got painted so it just sat and started to rust on the surface a lil bit but i knew i could fix that
http://img154.imageshack.us/img154/6350/prepwork008hx1.jpg
sanded it all down and then cleane it off
Then Primed Her Up
http://img294.imageshack.us/img294/6492/prepwork010bw1.jpg

Thats About where i am now i will update when something changes
i am waiting to hear from the guy on when i can go help him pull the motor and trans and the gas tank out so i can put it all in the rex.
Pce For Now :headbang:

2

Good job man…keep up the Massena Pride!!

3

Sweet, build thread
:popcorn:

4

UPDATE: Tomarrow I get the A6 with everything to run it and an Si tranny also gettin a gas tank and a fuel pump sence mine were junk

And
i traded my stock steels for a set of 14in acura integra rims(old style)
ill get pics of all the goodies tomarrow when i come home with the motor

Used Parts FTW!!

5

Got my parts!
http://img402.imageshack.us/img402/6168/parts001tu3.jpg
havent seen it like this in over a year
A6 power brings a tear to the eye :happy:
New Rollers
http://img267.imageshack.us/img267/7071/parts003al6.jpg
Next step after it runs
http://img402.imageshack.us/img402/5962/parts004uh4.jpg
rear disk swap
now i need to clean up
Enjoy

6

Huge Tom…Huge!

7

[quote=“Whiteesil80,post:6,topic:26260"”]

Huge Tom…Huuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuge!

[/quote]

There fixed:)

8

hah ik there huge it the way imageshack hosted them for some weird ass reason

Anyone Got any tips for wiring in the A6 into the DX

9

started doin the MPFI Swap Tonight
http://img201.imageshack.us/img201/6974/startofmpfiswap001yh3.jpg
New Dizzy Plug
http://img139.imageshack.us/img139/8404/startofmpfiswap002bs8.jpg
Wired Up
http://img264.imageshack.us/img264/2121/startofmpfiswap004vq0.jpg
in Car B/G to C1, B/Y to C2
TPS Wire Switch
http://img201.imageshack.us/img201/8369/startofmpfiswap006kk2.jpg
and thats what i got done so far
now for my question
http://img139.imageshack.us/img139/774/startofmpfiswap003qe5.jpg
i am kinda stuck here
C1 needs to go to B10
C2 needs to go to B12
but the graph that i got that tells what ones they are says that there are right next to each other so that would mean that i have a red and white wire in B12

Tell Me What IM Doin Wrong If Anything!

10

Looks good but you should really solder and shrink tube those wires, they wont last with those shit connectors.

11

ya ik
lol

know anything bout where im stuck?

12

http://honda-tech.com/zerothread?id=945557
http://www.angelfire.com/d20/hcivic88/dx-siwiring.html
http://www.geocities.com/teampimports/fuelinj.html
http://honda-tech.com/zerothread?id=478377

Just search HT and you should find everything you need.

13

k thanx found out the red and white wire is a wire thats not used and its in B12 so now i can keep goin

14

looks like a budget build that you’re not taking the time to do right. :tup:

15

the only reason i am trying to hurry and get it running is car im sick of not having a car
i have to use the parents vehicles and they dont like it one bit

and i dont know how im not doin it right
y dont u inform me?

the only thing i dont like bout it so far is the wire connectors and i will be gettin different ones right after ik it runs

16

yeah deffently solder and shrink them…and use electrical tape to clean it up.

good luck…keep the massena pride

17

ya im eather gonna do that or get the connectors with the solder in them

when u gonna get up here and bring me for a rid in that beast
and i see a few good cars for u to woop on drivin around to

18

I about had a heart attack went I saw the wiring. :frowning:

But the project does have some potential.

19

you seriously need to take a little more time in the project i know you need a ride but doing it right the first time will save a big PITA later. trust me. I think i know who you got the motor off of. ha ha thats funny. Im from potsdam and us import guys know everything that goes on in the realm.

20

[quote=“sweet89s13,post:19,topic:26260"”]

you seriously need to take a little more time in the project i know you need a ride but doing it right the first time will save a big PITA later. trust me. I think i know who you got the motor off of. ha ha thats funny. Im from potsdam and us import guys know everything that goes on in the realm.

[/quote]

I do have to say LOL to imports in potsdam.