hey im just curious. I have an SAFC I just to help out additional tuning but when im anything over 40% throttle at about 9lbs its showing 100airflow… which i know isnt happening because its an N32 mafs. which should be at about 50% at that stage. Any ideas?
Make sure ur in and out sensor settings are correct…
Correct. The SAFC can compensate for a Z32 Maf and look up your proper in and out settings and this will allow you to zero your adjustments.
I wouldnt be too concerned what the airflow % is unless you are running into issues. 40% is alot of fuel being removed I would monitor your knock because its going to throw your ecu fuel tables into a lower chart where timing is usually higher.
SAFC 1 doesnt have a knock sensor.
correct there is no knock on safc one.
also my in and out is 2 for 2 and 2in auto add.
this is because my ecu is tuned for the mafs anyways so anything else but equal in and out would f*ck it up.
im just curious as the the voltage range maybe?
Its not ACTUALLY maxing out i just want it to read it properly