Anyone know the pinouts for the wires??
Well, I have the SAFC II manual here, but it doesn’t list ANY KA applications under the Nissan list. Do you know if the wiring hookups are similar to any other s13 models? I have Silvias and 180sx listed here, in both CA and SR forms.
http://web.ics.purdue.edu/~tmerrick/240SX/apex_safc.htm , this is for safc I but I’m sure the safc 2 only has what a one more wire for the knock sensor. Either way I’m sure this will help. Found this on ka-t.org, it has the pinout for ka24de with safcII and it only has an extra purple wire for the knock sensor.
ECU PINOUT HELP
SAFC-II Wiring Diagram for KA24DET
SAFC-II Wire Color - ECU Pin # - ECU Wire Color - Function
White wire - ECU pin 16 - white wire - MAF Signal Input from MAF (You actually cut the ECU’s wire in half)
Yellow wire - ECU pin 16 - white wire - MAF Signal Output to ECU*
Grey wire - pin 20 - white wire - TPS
Purple wire - pin 27 - white wire - Knock Sensor
Green wire - pin 2 - yellow/red wire - Tach Signal
Red wire - pin 4 - black/white wire - Power
Black wire - pin 39 - black wire - Ground (Further from ECU 1cm from brown SAFC wire)
Brown wire - pin 39 - black wire - Ground (closer to ECU 1cm from black SAFC wire)
Refer to this post for more info http://www.ka-t.org/forums/viewtopic.php?t=8089
Thats the first thing i did, no dice.
Awsome. Thanks for the help.