Turbo Manifolds ::: RB25 / RB26

http://www.bings.ca/images/parts/skyline%20manifolds%20(1).jpg

http://www.bings.ca/images/parts/skyline%20manifolds.jpg

I have had these in stock for a while and never listed them.

RB26DETT manifolds for twin turbos.

RB25DET manifold for T3 single turbo with external wastegate flange.

These are off-shore manifolds, come with all the usual hardware, if you try and use the gaskets you’re a dummy.

$275 each…

i only have one of each… first come first serve.

bing should of told me.
i bought one recently lol looks identical but is branded turbo xs
surprisingly has really nice welds on it seems to be holding up so far

its probably the same or similar.

i think the lesson here is more so that you should consult me for every purchase that you ever make for the rest of your life.

lol…

Hey Bing, is there enough room on the collector neck under the turbo flange to cut and weld the flange at a different angle? I’m going to be running a Turbonetics T3/T4, but the last time I attempted to complete the project, it was delayed as the flange on my old mani was too steep and made the cold side of the turbo hit my valve covers. Let me know, I’m interested in this, I may pick this up instead of the sway bars.
**To anyone who is wondering, this will fit RB25 as well as RB20…

Sorry man, one more question…the w/g flange, is it for a 38mm? Thanks!

i really cant answer those questions definitively.

any fabricator can cut and weld it, the wastegate should be for 38mm but i cant confirm that. if RB20 / RB25 exhuast manifolds are the same flange then yeah it will fit… i know the intake manifolds are not interchangeable.

.

talk to me on msn…

$250 each

yes RB20 and RB25 manifolds are the same on the exhaust side… the intakes are not however. which sucks ass…