Unitronic Turbo-Back Exhaust System for MK7 VW GTI
Expanding on its already released Performance Software, Unitronic is pleased to present its Exhaust System upgrades for the 2015+ (MK7) Volkswagen® GTI®. Unitronic’s Exhaust Systems are a direct bolt-on, providing hardware support complementing its Performance Software to achieve maximum performance without sacrifice.
Unitronic’s philosophy in designing Performance Hardware starts by first analyzing the factory component(s) in various street and track environments to determine overall performance and likely limitations beyond certain power levels. Through analysis of the data collected, along with engine calibration and engineering principles applied, goals were set forth; optimization of exhaust gas flow and limiting backpressure on the turbine were top priority from a functional, performance oriented standpoint. In addition to these and following suit as is with all of Unitronic Performance Hardware products, ensuring precise OEM-like fitment and top tier component quality is also of utmost importance. All of this must be met without sacrifice, while also ensuring a competitive performance to cost ratio for our end-users.
All of Unitronic’s Performance Hardware products are designed using our in-house 3D scanner and modeling software. With these industry-leading resources in-house at our disposal, design aspects and fitment tolerances are at the maximum precision of up to four one-thousands of an inch. The result ensures maximum fitment precision on each and every Unitronic Performance Hardware product. After platform constraints and OEM components are 3D scanned, all data is imported into our modeling software, where we can analyze and interact with the chassis constraints to design an upgraded performance-oriented exhaust system to fit these constraints, as mentioned, perfectly; while ensuring that technical aspects and engineering principles are deployed.
On this 2.0 TSI® Gen3 platform, Unitronic’s Downpipe features a flow matched turbocharger turbine discharge downturn of 80mm smoothly tapering to 76.2mm (3”). The exhaust gasses continue through a 200-cell metallic matrix high-flow catalyst, located in the factory position for maximum efficiency along with an OEM-inspired heat shield to reduce radiant heat dispersing into the engine bay.
Unitronic’s Downpipe is designed to utilize the OEM mounting locations to ensure a seamless direct bolt-on upgrade, while securely fastening the downpipe to the engine. This results in mitigating any potential rotation of the v-band flange between the turbocharger discharge and downpipe under hard acceleration and engine movement. Unitronic’s Downpipe also features an 8-inch corrugated stainless steel flex section to further ensure long-term longevity and integrity.
Unitronic’s Exhaust Systems feature a unique v-band fastening system, using T316 stainless steel flanges and a locking ring to guarantee a centric alignment of the two v-band flanges to ensure a leak proof connection every time.
Throughout the research and development process of Unitronic’s Exhaust Systems, sound both in- and outside of the cabin is also a very important factor. Unitronic’s mufflers feature high density, high temperature glass fiber packing and are stamped with the Unitronic logo. These attributes combined ensure maximum performance and sportier sound is achieved, all while maintaining a comfortable tone inside the cabin. Existing at the rear, exhaust gasses pass through dual polished 4” slash cut tips featuring an engraved Unitronic logo for a more aggressive, motorsports-esque look.
These elements combined not only allow Unitronic to set itself apart from the competition, but also for less development prototyping, faster validation, and strict post-production quality control.
Unitronic’s Turbo-Back Exhaust System features:
• Direct bolt-on fitment with OEM mounting locations
• 80mm to 76.2mm turbo to downpipe transition
• 3-inch T304 stainless steel tubing
• T316 stainless steel flanges
• 200-cell metallic matrix high-flow catalyst
• Factory catalyst position for maximum efficiency
• OEM-inspired catalytic converter heat shield to reduce radiant heat
• Proper Oxygen sensor placement
• Corrugated stainless steel flex section
• TIG welded construction
• Unique v-band fastening system featuring Clampco® clamps
• Straight-through, free flowing muffler design
• Polished 4-inch slash cut exhaust tips w/ engraved Unitronic logo
Applications:
MK7 VW GTI
MK7 VW Golf® 1.8 TSI Gen3 MQB (Downpipe Only)
8V Audi® A3® 1.8 TSI Gen3 MQB (Downpipe Only)
5F Seat® Leon® 1.8 TSI Gen3 MQB (Downpipe Only)
5F Seat Leon Cupra R® 2.0 TSI Gen3 MQB (Downpipe Only)
5F Seat Leon Cupra FR® 2.0 TSI Gen3 MQB (Downpipe Only)
5E Skoda® Octavia® 1.8 TSI Gen3 MQB (Downpipe Only)
5E Skoda Octavia VRS 2.0 TSI Gen3 MQB (Downpipe Only)
Unitronic Spring Sale
On sale April 2 2015 - April 30 2015 for $1673.99
Unitronic is also offering a discount on software April 2 2015 through April 20 2015 which discounts new software $50, and I am going to match their $50 discount so you can save $100 on new software for those dates. Unitronic is also discounting most of their hardware by 10% . Call for details 716-510-3914 - Alex
http://www.unitronic-chipped.com/ecu-tuning/Volkswagen-GTI-20L-TSI-EA888-2015-2015-hwmk7gtiturboback