Alright i wanna get rims with a proper offset one day…but that day is not coming this summer…so i have these rims on my car now…and i wanna make them stick out a bit more becasue they are a bit wide on the front…i know spacers…but what size? people also told me instead of spacers to put washers to make them stick out…how safe is this?
heres a picture fo how it looks now…
i just want to stick out a bit more…whats the proper offset for 240sx anyways i dont quite understand about offset and things like this…anyone help me out?
what size are the wheels? that will help determine what size spacer to run. If you want more then 8mm, which you most likely will you will need longer studs like darian said or get spacers with studs installed.
a 17x9 +20 or similar sizing on an s13 will fit flush all around
Lucas, do NOT use washers, its not a good idea because teh wheel wont have proper contact with the hub. Also if you are going to get spacers, make sure they are hubcentric, the wheel must be centered for proper operation and no vibration.
25mm bolt on spacers at all 4 corners and drop the car as low as it will go, whenever metal touches something, hit it with a hammer until it doesn’t touch it anymore then keep going lower.
25mm hubcentric spacers with built in studs is the easiest way to flush those wheels… it’ll take you like 20 min to install them and you can take them off just as easily.
