Looking for 2 manifold pin/studs for Bing’s T2 bottom-mount manifold.
If not available, if anyone knows another set of pin / studs in the nissan parts bin that would also work, this information (part-no, etc.) would be appreciated.
Picture below of the pin / stud type I need:
Need this asap.
Thanks
Jack.
i am not 100% sure of the spec but i ‘think’ they are M10 x 1.25 or very very close to that…
i have broken many of these and i replaced them with studs that i got from Canadian Tire.
they may not have the studs on the floor or at all… one CT i went to had them as a part of a kit in the ‘help’ seciton and another auto department manager ordered in the metric ones and had them behind the counter.
they are quite common
you should be able to match them up relatively easily.
You could also try a Brafasco (not sure if I’ve seen one in Waterloo)…they’ll probably have something that works for sure if you bring in a sample and their grades go up to 12.9 I believe…not too familiar with turbo components but it’s usually good to go up a grade when you replace so I just thought I’d mention Brafasco…
Hope this helps.
awesome!
thanks guys!
edit: Got them from Spaenaur on Victoria St. in Kitchener - m8x1.25. $2.61 with taxes for 4 studs + 4 nuts.
*** PLEASE LOCK ***