Okay folks I have a complete Z32 Turbo Rear End… I highly highly doubt anyone wants the whole Subframe in tact but if so then just let me know
everything is SOLD
Interested in the rear diff, is this a direct bolt on? or does it need mods? get back to me soon.
As far as I know you can do two things…
The Diff Housing itself is not the exact same size “like the N/A Z32 Diff” the TT is a hair bigger (Based around the slight Subframe Different between the S13/Z32). But the VLSD itself is the same but with different gearing. So you can remove it and install it into the S13 Diff Housing.
If you use the Z32 Diff Housing you have to trim down bolt sleves and enlarge the bushings a tiny bit with a dremil. The Z32TT housing also is a 5 Bolt Axle pattern so you need to use the Axles with it.
Now, I have not done this myself but I searched on freshalloy/sr20forum/240sxforum. And that is the standard info I read from all the American’s who are using the Z32 TT Diff. So if anyone else knows other wise or has anything to add then please do 
do u have rear brake calipers and rotors?
No sorry dude… Whatever I have is listed above
i think you need to double check about the 5 lug hubs i was under the impression that turbo axles are larger there for the spline in the hub is larger, therefor they are useless to s13 people
turbo hubs are different but will still work on an S13…
http://importnut.net/300zxbrakeswap.htm#5-lug
the rear conversion is much easier, in terms of parts combinations. Simply find a 5-lug hub from an S14 240, or a Z32 300ZX. The non-turbo hub is identical to the unit used in the S14. The Turbo hub is slightly differnt, but will work on either the S13, or S14
where are the parts located currently?
At my shop here in kitchener…
Subframe is fully intact at this point… (minus Brakes/Ebrake)
I will post pictures up later this afternoon as I’m going down to take pictures for all those who are interested.
Bumpppp, boyeeeeee!
5 bolt hubs are almost certainly sold but I may have 2 sets so if anyone is interested still then PM me…
Here are pics of the rims and tires etc… etc…
245/45/16 michelin pilot SX tires “40% approx tread”. both rims are in very good shape “one almost new” other has slight curb rash but nothing near serious and can easily be repaired.
what is your phone contact i am interested in the rims
my number is 416-676-7650( MARK)
PM’d
Everything is still avaliable… thou the Tires are no longer thrown in with the Rims, It turns out one will not hold air and the other I’m keeping myself as I already have 1 misc 245/45/16 and could use the other to form a set.
I’d still like $100 ea Rim as its a normal going rate (I only included the Tires as they were on the rims and I was unaware of their shape until trying to use one)
Hubs I believe are spoke for but its really first come first serve so if indeed anyone else is interested, just let me know.
I was away/busy over the Holidays and was not able to arrange pickup on the Items people were interested in at that current time… all PMs are replied thou
Subframe/Diff/Axles/Control Arms/Struts are sold and gone…
Edit… I also have a set of N/A 5 Bolt Z32 Rear Hubs which I’ll also be asking $200 for.