Alex's 1993 Z28 camaro

[MclarenGP]

@Hank

after reading ur valve adjustment’s , i think ur too tight 3/4 turn. i usually only goa 1/4 turn.

if there too tight it will seem ok down low. but u will drastically loose on the top. dur to valves opening to long.

on hydraulic lifters i usually bott.lifter out. not with starter but use a ratchet.
get lifter bottomed. hold pus rod. spinning it freely keep snugging nut till pushrods no longer turns freely then go a 1/4 turn at best. anymore and ur too tight.

woops nevermind im wrong 2