can someone give me a complete parts list for lowering my civic

[PurpleMongoose]

@TXcivic96

If your going to do it right.

1. lowering springs and new aftermarket struts (i reccomend KYB AGX’s) or a GOOD coil over set up (i.e. Tein, D2, Skunk 2, Omni. NOT EBAY)

2. Shims and longer bolts for rear control arms- this fixes rear camber issues.

3. Front control arms (for front camber if you plan on lowering alot i personally don’t run aftermarket ones)

4. Check your tie rods, make sure the are in good condition, because other wise when you go to get it aligned you might end up paying twice.

5. Alignment.

Since yours is a 99 your LCA bushings should be ok, but check them out prior to starting, i’d reccomend ordering new LCA’s.

That’s almost everything; you’ll need the actual Civic, too.

Or, you can do it the ricer way, and just set your tire pressure at 18 psi.