Check Engine Light ?s

So i have a 02 WRX… i was being retarded and running and open BOV for a while… it ran rich and i threw a Check Engine light. I changed my Plugs first off earlier today. i then unplugged my ECU and waited 10 min and plugged it back in. after i went for a test drive and the car is still boggy as hell and sputtering if you go up above 5k. off the line its a dog as well. i went to advanced auto and got the codes read.

came up as 4 codes…

p0301
Cylinder 1
Misfire detected

p0302
cylinder 2
Misfire Detected

P0303
Cylinder 3
Misfire Detected

p0304
Cylinder 4
Misfire Detected

any ideas how to solve this issue?

Did you gap the sparkplugs according to specs? Could just be the new sparkplugs. I would put the old plugs back in and see if the car runs better, then you know its the plugs.

ya… first on obd2 cars pulling the pcm fuse does NOTIHNG!

second advanced sucks

third… get someone like me who has a graphing scanner who could read more than just p0301 etc etc…

vac leaks…??

good luck!

What kind of plugs did you get? Sounds like they are causing the issue. I wouldn’t go Platinum or Iridium. Get a standard plug, and it won’t foul out as fast.

it started before changing the plugs. i changed the plugs for that reason…

Sounds liek a fuel delivery or spark issue…does that car have coil on plug or one single coil …and do they have MAF sensors