The offset for the GTS-t Type M?? I am trying to buy rims and I cant find the preffered offset anywhere.
Thanks in advance
The offset for the GTS-t Type M?? I am trying to buy rims and I cant find the preffered offset anywhere.
Thanks in advance
My buddy had a big problem finding wheels to clear the calipers, but ill try to find out the offset and get back to you.
thank you VERY VERY much
are you lanny’s sister?
Who posts twice and doesn’t even introduce herself???
u are going to need something with at least +40 offset. especailly to clear the front calipers. thats the biggest problem on there.
More like +20.
Yes I am Lannys sister. Is it +20 or +40??
+59 just to be sure …I think you can use OEM intega wheels to be sure
BAHAHAHA.
Just so everyone is clear, OFFSET HAS NOTHING TO DO WITH CALIPER CLEARENCE.
It is all in the spoke design. I have seen some 178 0 offset wheels that do not clear z32 brakes on a S13. But flavio’s 178 +35’s clear with LOTS of room.
BAHAHAHA.
Just so everyone is clear, OFFSET HAS NOTHING TO DO WITH CALIPER CLEARENCE.
It is all in the spoke design. I have seen some 178 0 offset wheels that do not clear z32 brakes on a S13. But flavio’s 178 +35’s clear with LOTS of room.[/quote]
Thank you for finally saying that. I was going nuts reading all of these posts.
To the thread starter: How wide of wheels and tires do you want to run? Are you buying new wheels? What wheels are you looking at?
All I can tell you right now is that an 18 x 9 with +25 and 245s sits pretty friggin flush.
thanks…
http://www.tiretrends.com/wheel_catalog.php3?wheelID=4126
http://www.tiretrends.com/wheel_catalog.php3?wheelID=4122
http://www.tiretrends.com/wheel_catalog.php3?wheelID=4091
http://www.tiretrends.com/wheel_catalog.php3?wheelID=6426
those are some that I like…
no way then u wont clear the coilovers…lol…yes i know u are joking
:rolleyes:
go a +32 and a 5mm spacer and u should be alright
i would go with the RZ-5 Gunmetal 18x 8.5 +35 and 18x9.5 +25…because all the other wheels with exception of the Touge’s will be sunked battleships…and the Touge’s are to wide for your Gts-t fenders…
no way then u wont clear the coilovers…lol…yes i know u are joking
:rolleyes:
go a +32 and a 5mm spacer and u should be alright
i would go with the RZ-5 Gunmetal 18x 8.5 +35 and 18x9.5 +25…because all the other wheels with exception of the Touge’s will be sunked battleships…and the Touge’s are to wide for your Gts-t fenders…[/quote]
Those are pretty much the best sizes of the wheels you listed. They should fit nicely with a bit of a stretch on the rear. If you don’t have suspension, however, I would do that first…
Ok so I bought these rims:
And the rear tires are slightly rubbing on the spring what should I do now? I am NOT taking them off my car so I need them to work. Should I go with a 5mm spacer or a 20mm? The fronts are almost flush and do not rub. If you think I need a 20mm does anyone know where I can get them tomorrow so I dont have to wait 2 days for them to be ordered? I know mopac has 5mm’s in stock.
don’t you need longer wheels studs if you are going to use 20mm? i don’t know if skyline studs are longer then 240 studs but i’m pretty sure they are the same length.
just use a 5mm to get it away from the spring or else it will eat through your sidewall in short order