Thanks to EZFD for the screwdriver.
Mike for the hose clamp and headlight shining
Tuff for the mini light
And altimarollin for the pack of shims (napkins)
HA! Let’s see you try to come off now!
lol
yea that should hold…
lol, sweet clamp
why not just weld/roll a bead at the end of each pipe and put t-bolt clampm on that? ive never had a hose slip off a beeded end
^ There’s the easy way and the Newman way
haha nice
[quote=“Viper966,post:5,topic:34876"”]
why not just weld/roll a bead at the end of each pipe and put t-bolt clampm on that? ive never had a hose slip off a beeded end
[/quote]
it is beaded. it has tbolt clamps. the pipes don’t align perfectly, and this was much easier.
It only took an hour to do.
haaaaaa nice ctnewman…no more issues for u
lol at the overkill
[quote=“newman,post:8,topic:34876"”]
it is beaded. it has tbolt clamps. the pipes don’t align perfectly, and this was much easier.
It only took an hour to do.
[/quote]
that explains it… at least you didnt go baller and get a wiggins clamp
[quote=“Zong,post:10,topic:34876"”]
lol at the overkill
[/quote]
it’s not really overkill. It blew off at least 5 times despite various positioning and i was getting fucking sick of removing my bumper to fix it.
[quote=“93dx–hatch,post:13,topic:34876"”]
^ fix the pipes
[/quote]
a longer coupling would have worked too, but this was a lot free-er.
that’ll do pig, that’ll do
[quote=“J&J,post:17,topic:34876"”]
how much PSI you running?
[/quote]
24 or so.
the problem is not in the pressure, but the slight misalignment.
what size is teh piping? you know what works really good? the napa hose… its cheap and can hold like 90psi (its actually like 2.5" radiator hose) but the stuff grips pipe like no other… ive had to actually use a syringe to stick in teh same to wet the inside to get it to slide of an aluminum pipe,
[quote=“Viper966,post:19,topic:34876"”]
what size is teh piping? you know what works really good? the napa hose… its cheap and can hold like 90psi (its actually like 2.5" radiator hose) but the stuff grips pipe like no other… ive had to actually use a syringe to stick in teh same to wet the inside to get it to slide of an aluminum pipe,
[/quote]
yeah, as i stated, a longer coupler may have helped, but this i made with scraps at my work. and i KNOW it will work. the longer coupler still may have slipped off.