OK, this may not be the most organized car part out, so read everything. These parts are off a friend/customers 2002 camaro SS, that sadly was in a bad wreck. To help him the new era guys, and a lot of others are helping out here. But there is a compromised of time/money spend on removing/cleaning/inspecting/listing/selling parts. And the money raised doing it, in a already full day of working on customers cars.
All these parts are SOLD AS IS, and its encouraged to stop up at the shop and check them out yourself, and make a offer. That is how alot of this stuff is selling. Many parts with light damage were bought dirt cheap, because they know they could easily fix them. Show cash, don’t lowball thats all were tring to do really.
I also have the right to raise the prices, I few parts I been sold without knowing there real valve. I’m not looking to rip anyone off, but this stuff really can’t be given away. The money really needed, and a few parts have been sold fir way less them there worth becuse we didnt have tim to look up, if ther hard to find/ unavavilbe anymore. sucth as the SS spolier with brake light, other SS/SLP parts.
Stock motor mounts- SOLD
LS1 fuel/Evap line. Clean. Replace you ugly old, damaged, or for a motor swap. $30
ASR switch- SOLD
SS 10spoke wheels, with tires. Not in flawlass shape, they are dirty $125 each
SOM SS sail panel. Perfect for berger mod, has a crack but not seen under the passenger tail light. The passenger end is a little twisted but might be fine once bolted to a car. The car had a little damage on the side, but it is flexable. $25
ARP Hex Head Bolt Kit head bolts, Like new only 2-300miles on them $75. They are $100 new.
For LS2, L92, LS7, and mid-year 2004+
Powerbond 25% Underdrive crank pulley for LS1 Fbodys- SOLD
Driver side LS1 caliper, with caliper bracket, all bolts, good pads, and flex line. $25
trunk carpet, (has a tear in pic, the weather stripping should hold it down and you wouldn’t notice it) $25
I also have another spare one with a tear form the latch spring $20
driver side rear truck carpet $10
Driver side LS1tail light $50
LS1 rear coil springs SOLD
stock toque arms Boxed LS1 M6s, and lighter a4 and v6, $25 each
Driver side Ttops
SS floor mats SOLD
SS hatch mat make offer
Dash pad $75
driver side mirror (SOM) $75
4th gen full carpet. This has all the backing jute, and rubber/tar section removed for weight savings. It still has some area you can cut out to save even more weight. The ears over the rear wheel wells, under the concel, front seats, door sills, and few other places. Its tan is color, but I started to do a color change to the dark grey/graphite. with carpet dye, it works awesome but I haven’t finished it yet. $45 make offer
4th trunk carpet, has a small rip near the hatch lock. $15
RAM power grip HD pressure plate. (do not have the disk) $150
RAM steel billet flywheel $175
Ttop holder $20
Leather rear seat, dirty needs to be cleaned. passenger lower cushion appears to have a mark form other parts sitting on it. I don’t think its ripping. $100
Door jam sill plates $25
driver door panel. Im not sure if anything is damaged? make offer?
driver door, SOM I didn’t remove it and dont know much about it. But it was pulled off the car, and put with good parts, the driver side was fine I belive. So check it out in person if your needing a door.
LS1 coils, and bracket
this is the 99+ bracket, so if you switch to 99+ heads or aftermarket heads. On you 97-98 LS1 car you need these. Bracket can be bent back. Has the coil harness, one coil is damaged. The other bracket with coils I think someone already bought, so we don’t have a set. $50 ( I’ve heard form customers that coils are over $100 each new)
T56 6speed trans. Stock, 60k miles. Was fine before the accident, but the input shaft visually has a slight runout. I didn’t put a indicator on it, but only like .020 at the bushing end. The input shaft bearing is still tight with no/little forced wiggle. Sold as is. Last year t56rebuilds/sixspeeds gave me $500 for a t56 in 3 boxes, with 2 bad gears, and a broken fork.
Make offer over $750, if shipped buyer pays cost.
402- SOLD
10bolt, with brakes and everything… I think it has gears…Ill get more info later
One of the many group pics. I have to look thu and see whats stuff worth. feel free to make a offer.
L76 intake manifold is Sold
fuel rails are sold
That master is mcleod. They have been on national backorder all year, and impossable to get.
New go for about $325-$350 Need to get $250 for it.
K&N need to be cleaned, will clean like new. $25
QTP 3inch cutout, everything: wiring, switch, motor, part of stock Ipipe $100. Is far as I know it works, but hasn’t been tested. As with everything else it encouraged to check out the parts yourself and test them. Will probably cut down the Ipipe if need to ship, at buyer expense of actual shipping cost.
stock MAF $50
Tons of other parts, Ill try to get pics, and a better list.