The rust is severe. The hatch is bad on the inside. Most if it was sandblasted off so there is no more rust at all at some spots. Some spots were just too far gone. The joint at the right side off the rear bumper we couldn’t get too cause the bolts for the bumper were stuck on. The rockers of the right side has a hole it.
Bottom line is the rust on the hood and hatch will come back. We tried but it was so bad. The bodywork and paint was all done using topnotch products. The paint used to be flawless. It should still be completely free of orange peel (except for spoiler). Most likely the flattest paint I’ve seen. Wetsand and buffed whole car multiple times.
The car has the window frame problem alot of dsms suffer from. When you close the door it rattles.
The car also has a hole in the oil pan. Its nothing to serious but it’s there.
It has a slight grind problem also to from 1st to 2nd and 2nd to 3rd.
Its A 2nd Gen so crankwalk is a problem I didn’t know of it when I seen it but someone said that it has it so…
It’s a project Thats all