Mr_T
December 16, 2007, 7:36pm
35
kyle91987:
The rust is severe. The hatch is bad on the inside. Most if it was sandblasted off so there is no more rust at all at some spots. Some spots were just too far gone. The joint at the right side off the rear bumper we couldn’t get too cause the bolts for the bumper were stuck on. The rockers of the right side has a hole it.
Bottom line is the rust on the hood and hatch will come back. We tried but it was so bad. The bodywork and paint was all done using topnotch products. The paint used to be flawless. It should still be completely free of orange peel (except for spoiler). Most likely the flattest paint I’ve seen. Wetsand and buffed whole car multiple times.
The car has the window frame problem alot of dsms suffer from. When you close the door it rattles.
The car also has a hole in the oil pan. Its nothing to serious but it’s there.
Its A 2nd Gen so crankwalk is a problem I didn’t know of it when I seen it but someone said that it has it so…
It’s a project Thats all
The grinding , i have no clue what your talking about, it grinds once out of about 30 times , putting it in first and thats it, no other gears grind.Theres no crank walk with the car either.And as far as i know there is no hole in the oil pan anymore, hasnt leaked a drop since ive owned it.