price on rb20/25 top mount exhaust manifold?, direct bolt to stock rb turbo or?
FFFUUUUUUUUUUUUU
rb25 turbo if you end up parting 
RB25 NEO if you end up parting.
CF hood is tentatively sold to my buddy
I don’t have an RB25 turbo
I’d sell the Neo seperately, PM me with an offer.
how much for the sr in parts?
Finally got pictures of some of the stuff. I’m taking offers on parts separately now except the motorset stays together (engine, tranny, harness, ECU). PM me with what you want and an OFFER. And only PM me if you’re serious.
type x bumper is sold, some other things are tentatively sold but still here.
i want the shell
how much for greddy manual boost controller?
im pretty sure the car has leather rears, if parted let me know i will take them
Peter, the shell is pretty rusty underneath but let me know what you want from it and i’ll let you know if it’s worth while.
$50 for the greddy boost controller.
Yeah it has grey leather S13 rear seats in decent condition. PM me if you want them.
how much for the turbo smart manual boost controller, and the sr20 in parts?
$50 for the turbosmart.
Not really sure what to ask for the sr, $300?
Finally got around to making a price list for what’s left. Come buy. Buy lots of stuff, get better prices.
Engine parts:
rb25 motorset. Series 2 so it has the newer ignition system and stronger transmission. stage one clutch, greddy timing belt and throttle body relocated to the front of the manifold. No turbo on it though. $1500
full 2.5" exhaust with a flowmaster muffler, for an RB20 or RB25 S13 - $100
fmic with piping and greddy bov. For RB with front facing throttle body in s13 - $200
custom drive shaft for RB25 into S13 - $300
rb20/25 knock off greddy intake manifold, brand new - $250
rb20/25 top mount exhaust manifold, flange angle modified to fit large turbo - $250
rb25 eurodrive stage 1 clutch, used less than 1000km - $150
Holset H1c, external wastegate, has shaft play, should be rebuilt (rebuild costs $100) - $150
Holset HX35, internal wastegate, has minor shaft play, can run as-is or rebuild (rebuild costs $100) - $250
Ebay .50/.60 T3 turbo, good condition - $150
Ebay external wastegate with gaskets and flanges - $100
RB25 series 2 ECU - $150
Z32 MAF with pigtail - $100
complete sr20 in parts - $300
sr20 megan exhaust manifold, cracked - $40
S13 stock size metal rad - $40
Electronics/gauges:
AEM wideband - $120
Greddy E01 boost controller - $250
Greddy manual boost controller - $50
Apex’i boost gauge - $60
Apex’i AFC Neo - $250
CB radio with antenna - $100
Suspension/brakes parts:
complete non-hicas subframe with solid aluminum bushings - $100
tien HR coilovers, front right mount is ripped - $200
180sx front brakes with calipers, lines, rotors, aftermarket pads - $80
240sx front brakes with stock calipers, lines, rotors, pads - $40
non-abs brake master cylinder - $40
Drivetrain parts:
welded diff, non-abs - $80
vlsd, abs or non-abs - $60
S13 drive shaft, abs or non-abs - $40
axles - $40/pair
Chassis/body:
VIS racing carbon fiber vented hood, slightly damaged on one corner… not very noticeable. $300
coupe wingless trunk - $60
doors, power options - $40 each
pop-up hood, no rust but one dent - $20
driver side pop-up light assemblies with cover - $40
clean gas tank - $60
clean sending unit with walbro 255 pump - $80
coupe rear bumper - $20
coupe tail lights - $ 80/pair
coupe fiberglass valances - $60
USDM sideskirts - $80
pignose front lips - mint one for $80, cracked one for $40
Interior:
S14 black leather seats, driver’s seat has wear - $150/pair
misc s13 coupe black interior panels - $5 each
do you have the hood or did you sell it to derrick
were did the diamonds go i wants
I took them off the list because I got too many retards messaging me thinking that there were 4 good ones. ONE IS BENT!
$300 for 3 good ones and 2 good tires.
sounds like a good enough deal to me im sure i can manage getting one new one. can i pick up on saturday? they are 4x114 right (not sure you union guys all do 5 lug swaps lol)
Yeah, they’re 4 bolt. I work until 6 on Saturday but Saturday night is fine.
sounds good to me, please pm me the union address or were ever they are, its been a while.