For sale i have a almost brand new GT2871R .86 turbo that has been modified for an external gate. With it will be a stock exhaust manifold that has been ceramic coated for an SR20DET and a 40mm HKS external wastegate on top. It will also come with a Greddy turbo extention. This set-up has about 2000-3000 kms on it and it has run very well for me. It should around 400WHP on an SR with the correct supporting mods
Manifold, gate, turbo ext, all lines, and an intake pipe and turbo i am asking 1800. Basicly its everything needed to bolt up to an SR, down to the last hose clamp. It will be out of the car in a week or so, better pics will be up then, the gate is missing
Kinda see it better here
Located in Edmonton alberta, so i will split shipping with buyer
External gates usually free up some exhaust gasses and alow for more power. As far as boost creep goes …Its negligable on small turbos like this, the gate sounds mean as hell when it opens on RS13’s car.
If i part out i already have the gate sold. But i do not want to because the turbo will not be worth alot with a welded shut internal gate. You will have to buy a new exhaust side and HKS flages for their gates are not that cheap.
Reason for selling is that i spun a rod and i am probably not going SR again
More Pics, Comes with EVERYTHING you see in the pics, Lines, Greddy Turbo Ext, Oxygen sensor ETC, The only thing you need is about 4 inches of oil return hose because i cut it to take it off.
Some more pics at the request of people.
The welding was done by a ticket’ed b-pressure gas welder with about 7 years of welding experience all over alberta.
Internal gate welded
The extent of the dump pipe for the ext. gate. There is lots of room to make it longer if so wished
More pics of the welding
