FS: Nissan 240sx

Nissan 240sx hatchback , 1989 , new SOHC motor, 5 speed , 150XXX on the motor , 180k on the chassis , runs and pulls strong ,sun roof , pop open and can also be completely removed, very few mods , cut airbox , and a 2.5 inch stainless steel exhaust (catback) , 4 brand new snow tires all the way around , new rear break pads , new break lines , new fuel lines , front and rear main seals , engine is painted black/silver combo , brand new Interstate battery , denso iridium plugs and performance plug wires. new water pump , and all belts were changed , heater works very well.

cons: lil rusty but nothing serious , paint on roof and back is a lil faded but simply redone ,

selling because of college and i need money to buy photog. equipment.

price? maybe its there and i just missed it. also, pics sell stuff

ugghh, i shouldnt even be asking, but. whats the price, and how severe is the rust? got any pics?

[quote=SR20drftSX;475563]Nissan 240sx hatchback , 1989 , new SOHC motor, :fyi: 150XXX on the motor

is that the NEW motor???

does it come with the ‘slide squad’ banner on the windshield? what about muscles under the hood? :smiley:

good luck dude, but hook us up with a price

hahaha no i removes the ‘slide squad’ banner and theres still a lil muscle under the hood , this gentleman is quoting them from my myspace…umm heres some pics and the price is 1600 OBO, i paid 1K for the car and have over 1000 into it…also regular maintainence has by done by myself or a reputible shop , i change the oil every 2000 miles

http://i70.photobucket.com/albums/i102/SR20drftSX/carindrivewayandthehouseandmotor20.jpg
(new motor) havent had time to paint valve cover , i have a spare valve cover aswell along with other various engine components
(complete wiring harness)

http://i70.photobucket.com/albums/i102/SR20drftSX/carindrivewayandthehouseandmotor19.jpg

http://i70.photobucket.com/albums/i102/SR20drftSX/carindrivewayandthehouseandmotor11.jpg

http://i70.photobucket.com/albums/i102/SR20drftSX/allinstalled2.jpg

http://i70.photobucket.com/albums/i102/SR20drftSX/timingcover1.jpg

exterior:


lil dirty in this one damn NYS salt.

im limited on my interior shots , but after i get home from school tommorow ill be sure to snap a few shots of the seats and stuff…they are in pretty good shape with only a few small wear marks

wow, looks like there is not a spec of rust on it. someone pick this up.

i fergot to mention that we did a complete replacement of the clutch with an Exedy unit , and the pressure plate , had the flywheel resurfaced , and also replaced the slave cylinder , and yes thats the new motor , the car is pretty dirty in most of these shots , i just snapped them as i was out and about

the real rust is on the undersides of the cars , it could use some welding in a few areas , but not spots are weakened ,ive had a mechanic check everything over and he said that its in no danger but needs to be patched

how far are u from buffalo? i might wanna check it out.

really not that far , depending on where i met yu…i live 25 mins south of hornell , i can meet yu there whenever …mapquest sais 2 hours from the heart of Buff

damn i know u said u need the money, but if u wanna trade for a half finished civic turbo then pm me

its in rough shape, but i got a lot of parts for it

[quote=“boardjnky4,post:12,topic:25471"”]

damn i know u said u need the money, but if u wanna trade for a half finished civic turbo then pm me

its in rough shape, but i got a lot of parts for it

[/quote]

it aint that rough tom , what turbo kit do u have on there now that u sold tony the old one?

its not on there yet, but i have a skyline turbo(fancy term for t28), greddy manifold, and a fmic.

body of the car needs a little sanding and paint

to be completely honest. im sick of looking at it and not driving it. i just want something that i can drive. but that ka24 wouldnt be NA for long, lol

I’m totally interested in looking at this if you have it around end of March.

boarder and Anti , please Pm me as soon as yu can…boarder , i deff need to see pics and condition and everything

ill snap some pics later on for you

bump for a tits 240sx if i had dough this is my dream car and i dont even have to crawl under it to do the garbage can

[quote=“crushedredbeater,post:18,topic:25471"”]

bump for a tits 240sx if i had dough this is my dream car and i dont even have to crawl under it to do the garbage can

[/quote]

what the hell does that even mean?

i might be interested in this, lol.

edit: i thought you were selling b/c you needed money for school?

edit2: how’s the tranny

i am selling it because i need money for school , i need photog. equipment for the school im going to in Boston …the tranny is good…shifts a bit catchy when its like 5 degrees out but as soon as yu get the fluid moving and warmed up , it shifts perfectly and smoothly…these trannies are bulletproof