FS: S13 parts Part 1. Epic FS thread is epic. 56k GDIAF.

Condition: New&Used
Location: Thornhill, ON
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description:

Edit: June 21, 2008: I AM NOT PARTING OUT THE CHASSIS! FIRST PERSON WITH $4500 TAKES THE WHOLE THING. Unfortunately I don’t have the time/patience to part it.
On the plus, here’s what you get for $4500:

On chassis:

  • Tanabe sways with brand new endlinks and bushings front and rear.
  • Nismo Power brace
  • Bing’s TC rods
  • 1998 type-x motor with Greddy M-spec full FMIC kit with Greddy Type-RS blow off valve
  • Stance GR+ coilovers
  • Apex’i N1 catback
  • magnaflow 3" hi-flow cat
  • Megan turbo elbow with 3" downpipe
  • Pretty Type-X gauge cluster :smiley:
  • and of course, all the regular stock goodies like interior panels and other things that you could easily part.
  1. problem: chassis needs to be flat-bedded as it cannot be driven due to damage :frowning:

Edit: All parts are sold as-is.

I’m selling all my s13 parts. No more s13’s for me.

There are some parts that are still IC and some that are pending sale, I will label those accordingly.

Note: Feel free to throw me offers for parts ‘$TBD’. I’ll either consider it or completely ignore you. If you don’t get a reply from me, it’s a sign you need a reality check.

Anyhow, without further ado:

WHEELS

  • Work Emotion XD9 staggered wheel set. No part outs unless you find me a buyer for the other 2. 4x114.3 bolt pattern. No tires included.
    Note! A brief history: The front passenger side wheel did make contact with the wall when I crashed. The outer lip is scratched up, but doesn’t look too bad. No structural damage (bends or cracks) is visible.
    o F: 17x8.5 +25 offset
    o R: 17x9.5 +28 offset
     $1000 OBO
    Damaged rim:
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008316.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008318.jpg
    Rear wheel with tire (225/45/17):
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008322.jpg



    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008321.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008320.jpg

  • S13 7-spoke sets: I will sell these in multiples of 2 onry. Most of the tires aren’t worth keeping, these were my drift wheels.
    o 6x silver, good condition. 4x currently installed. That means only 2 are available right now.
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008325.jpg
    o 2x Red gloss, paint chipping but good condition
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008327.jpg
     $25 each if buying 2
     $20 each if buying 4 or more.
    o 4x gold, 2 with winter tires. One tire has a small pinhole (circled in the picture). This can be patched up for very cheap. The 2 remaining winter tires will be included in the sale. Tread is still very high, these are quality winter tires
     $250 obo


    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008326.jpg


  • S14 teardrop set (SE 4-lug)
    o 4x painted a nice bronze colour. Mounted on them are Dunlop Direzza 205/50/R15 all around. Lots of tread left.
    Note: I will NOT part these. You buy them and sell the tires (or rims) yourself if you don’t want them.
     $400 obo (sale pending)
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008329.jpg

SUSPENSION

  • Stock S13 HICAS F&R sway bars, some end links left, I didn’t check if they were intact. Bars themselves are in good shape.
    o $TBD
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008314.jpg

  • Tanabe S13 F&R sway bars (I think 27mmF, 22mmR diameter), Bing’s end links included. Currently installed, and used for maybe 400km. Pretty much brand new.
    o $400 with end links
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008365.jpg

  • Non-HICAS rear subframe, sand blasted & powder coated pink. Great condition.
    o SOLD

  • Bing’s solid subframe bushings (B.N.)
    o $60 firm. Bing sells for $100

  • Bing’s full rear s13 multilink (Traction arms, toe arms, RUCA) (B.N.)
    o $550 firm. Bing’s go for $600.

  • Stock RLCA. Ready for sand blast & powder coat.
    o $40 obo
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008310.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008309.jpg

http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008298.jpg

  • Bing’s TC rods. Currently installed. About 400km on them. Almost brand new.
    o $180 obo. Bing sells for $235
  • NISMO power brace. Currently installed. About 400km on it. Almost brand new.
    o $200 obo. Bing sells for $260
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008366.jpg
  • Stance GR+ Coilovers. Currently installed with 8/6 springs. 9/7 separately included. About 400km on these.
    o $1200 firm
    http://photos-b.ak.facebook.com/photos-ak-sf2p/v75/172/26/28120126/n28120126_34827841_1269.jpg
  • Stock suspension (shocks & springs) excluding top mounts.
    o $TBD

DRIVETRAIN

  • IC: Tomei Technical Trax Advance 2-way differential. B.N. never installed; which means you need to find your own pumpkin. Comes with LSD oil, gaskets, Nissan gaskets & bearings.
    o $1000 firm
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008339.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008340.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008341.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008342.jpg
  • All stock parts (SR tranny, driveshaft, VLSD etc.) will be for sale once I part the car.
    o $TBD

INTAKE/ENGINE/TURBO/EXHAUST

  • KA24DE Injen air intake (piping onry). Comes with most couplings (maybe even all) and cold air extension. No hose clamps solly.
    o SOLD
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008331.jpg
  • JDM SR stock intake stuff. I’m not exactly sure how it works & fits, lol.
    o $best offer
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008305.jpg
  • Complete SR stock SMIC setup. Includes flanged hotpipe with Blitz Super Sound BOV.
    o $150 OBO, buyer fell through. (sorry about that, everyone)
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008296.jpg
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008295.jpg
    Yes, I know there’s an intake pipe sitting in the midst of those parts, lol.
    http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008297.jpg

-’98 SR20DET Type-X motor. Currently installed. 11x,xxx km’s. Digital ODO can’t lie! This motor doesn’t afraid of anything; ran like a champ right until the crash.

o Note: might have problems with cold-starts. I don’t know why, but it stalls out unless you keep your foot on the gas when the engine is cold. This happened to me regularly, but in the winter onry.

http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008354.jpg
http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008358.jpg

  • Greddy Intercooler kit. M-Spec if I remember. Please correct me if you notice I’m wrong. Currently installed. Used for about 400km. Includes piping, intercooler, most couplings (one blew from the impact of the crash). No piping was damaged. With this I also have a flanged hot pipe with a Greddy Type RS BOV installed. Very unwilling to sell the BOV separately, but maybe you can convince me.

http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008355.jpg
http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008357.jpg
http://img266.imageshack.us/img266/3038/dsc0071ve1.jpg
http://photos-d.ak.facebook.com/photos-ak-sf2p/v79/172/26/28120126/n28120126_35236367_9681.jpg

  • Megan Racing Turbo elbow, Megan racing downpipe (3” methinks), Magnaflow 3” high-flow cat, Apex’i N1 3”-3.5” cat-back with resonator. Currently installed. Most of this stuff is in good condition. Used for a few thousand km. I think there’s a gasket leak somewhere from track use… but that’s an easy fix.

http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008363.jpg
http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/18022008362.jpg

Feel free to PM me with inquiries.

Chris

how much for the solid subframe bushings shipped to n0b2n0?

Will Ship?: N

Read prz.

sorry missed that in the wall of text/pictures

Updated prices.

Work Rims 1000 firm
Tanabe sways 400 with end links
Bushings 60 obo
Multilink 550 firm
Rlca 40 obo
Tc rods 180 firm
Power brace 200 firm
Stance coils 1200 firm
Sr 2300 obo
Fmic kit with bov 700 obo
Zaust 3-400 obo

I’m considering selling the entire car for $5,000.

That’s:
Sway bars (400)
coils (1200)
power brace (200)
tc rods (180)
sr (2300)
fmic stuff (700)
exhaust (3-400, 350 lets say)
oh, and gauge cluster at LEAST like (200)
= 5530 plus all the random junk you can part from the chassis.

Consider it! If there’s interest i’ll post pics of the chassis.

Oh, did I mention the SR has an Exedy stage 2 clutch with about 2,000km on it onry? Well now I did, if it sparks more interest.

and lastly, i didn’t have room in the first post, so i’d like to thank Dan (Osad) for helping me organize all the parts and pics for the sale. Great guy, he doesn’t afraid of anything.

Oh, unrelated to sale, but thanks to Dan (Osad) for the help with organizing these parts & taking pics :smiley:

i also humped this car a couple of times when chris wasn’t looking, look me for a boot in it at dunville. i skeet in his seat + my un’s. i don’t think he knows. but his passenger seat should be quite valuble now : D. jk

ENGINE for sure is full of power, even sasha said its one of the faster s13 sr’s hes worked on.

good luck on the part out bud!

sell just the fmic? alone?

you mean without the piping? no dice.

i want ALL these parts gone, find someone to take the piping/bov and i’ll think about it.

keep in mind i’m not taking anything off the car for a while, too, so you’d be waiting a bit.

http://photos-b.ak.facebook.com/photos-ak-sf2p/v75/172/26/28120126/n28120126_34827841_1269.jpg

Chris, this is an incredible picture…

i think you should post up pics of the chassis…

i’ll vouch for all the parts Chris picked up from me last year.

That price on the sways with endlinks is really outstanding…i cant sell it for within $150 of that price… in fact, i cant even get rear endlinks right now at all.

http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/DSC01031.jpg
http://i192.photobucket.com/albums/z313/Osadkid/Chris%20K%20Partout/DSC01028.jpg

i pmed you about the HICAS bar. Send me your contact info.

HICAS lock bar sold.
JDM front spindles/tcrods/ctrl.arms sold.

non-HICAS subframe sold.
rear spindles/bearings/hubs sold.
^thanks Brian for picking them up :smiley:

thanks dan for posting pics of the car w/rims

how much for the Blitz SS?

you have a drivers seat?

^Yes but nothing is being parted from the chassis right now. You will have to wait.

sale currently pending on that and the smic stuff.
i’ll get back to you if it falls through

Buy my shat, goddammit.

is that subframe sold 100% :frowning:
pm’d for parts

Subframe was already paid for and picked up Mamba.