H/C/I 306

Classifieds
1

Well I’m going 408 so I’m selling my 306. Motor was built 2 years ago and has 19,000 miles on it. When the pistons were put in, the machine shop balanced the Flywheel and balancer to the new pistons. So the flywheel and balancer (stock one not the Ford Racing one in the pics) will be going with the motor. The rubber on the stock balancer has broke so you will need to get another balancer balanced to this rotating assembly. I just wanted to be upfront about this.
This motor went 12.9 @106 in my 3450Lbs 1995 GT with a best trap of 108.
Note: I will be taking the Timing cover off of the motor as I will be using it on my 408.
Stock block .030 over for a 306 cu. in.
Celvite Rod, Crank, and Cam bearings
Stock crank (polished)
Stock rods
ROSS Forged flat top pistons (makes CR about 9.6:1)
Blue printed oil pump
Canton Bottom end Girdle with Main Studs
Trickflow Stage one cam (221int/225ex, .499int/.510ex, 112 lsa)
Edelbrock Performer 5.0 170cc aluminum heads w/ 1.90" intake valves, O-ring heads, 60cc chamber
ARP head Studs
Upgraded valve springs good to .600 lift
Ford Racing 1.6 Roller Rockers
Ford Racing Lifters
New Waterpump @ rebuild
Trickflow hardened Pushrods
GT-40 ported lower intake
Tubular GT-40 upper intake

I would like to sell this complete for now, I will part it out if there is no interest.
$2250 OBO

http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0970.jpg
IMG_0970.jpg1024×768

http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0971.jpg
IMG_0971.jpg1024×768

http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0972.jpg
IMG_0972.jpg1024×768

http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0979.jpg
IMG_0979.jpg1024×768

http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0974.jpg
IMG_0974.jpg1024×768

http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0975.jpg
IMG_0975.jpg1024×768

2

bump

3

seems like a decent deal, good luck with the sale.

Seems like a good motor you throw a little boost at.

4

I’d love to put this in my Crown Victoria! GLWTS

5

ttt

6

how would this stack up with say a stock LS1?? lol GLWS!

7

free bump for a solid looking motor :tup:.

glws.

8

Beats stock ls1s in my car. Would do even better in a light fox

9

bump willing to part out!

10

cam sold

11

someone inquired about this on wnyfbody in your thread, i believe yesterday unsure if you saw it or not, stuff gets bumped down all the time in that section.

12

i did get an email about that

13

ttt

14

bump, motivated to sell!

15

How much for the shortblock

16

$400, includes shortblock with no cam, pan, oil pump, flywheel, and broken balancer. as described in the ad it needs to be re-balanced