Can anyone verify that the bottom of the oem fuel filter is M14 x 1.5mm? I searched Honda-Tech, but I don’t know who’s knowledgeable and who’s just regurgitating information from somewhere else.
I need to order an adapter to AN for the new hardline in my daily. (russell aluminum hardline) The fittings are $12 each and I don’t want to order the wrong one.
yes it is 14mm x 1.5. If you want to be extra sure…take a filter to an autoparts store and ask if you can verify with a tap. You could also run to a harware store and thread a bolt into it. I’m 99% sure though.
EDIT* JUst verified it M14 x 1.5
I didn’t have a filter laying around to take it somewhere. Thanks for the verification. I need to get those adapters ordered now.
a1000 everything is -10an!
hahaha. This is for the daily w/ the y7 motor.
That’s the plan for the black hatch if funds permit this winter.
Dont do it! unless your shooting for over 650whp
I think its around $1500 for pump lines filters Regulator fittings <—killed me
I should have stuck another 255 down there!
Did you go into the rail with -10 or into a Y then each end of the rail with -8?
If you ever have to replace stock hardlines…russell aluminum is where it’s at. ~$25 for 25’.
I am making my own fuel rail
I got fuel rail stock @ atp for like $10 It will be going -10 in and -6 out to the FPR and useing the stock feed as the return.
It looks like i am getting the russell aluminum to give it a feed too