example:
to make these hubs you sent me work with these bearings, I have to:
- machine the hub race down to press fit into the bearing ID
- machine down the face of the bearing carrier so the depth is more shallow than it is now(currently about .25") and doesn’t bottom out on the hub itself.
- machine down the diameter of the stop race so that it fits into the ID of the bearing carriers with some clearance
- machine the new stud registers
I have no idea what the hub offset will be with this combination, but from first glance this evening it looked as though it would be on the negative side(which if off is the way we’d want it to go anyway)
What other hub options do you have and what dimension(s) is/are off?