As the title says, one of the best on the market if not the best for an unbeatable price, software with the same features cost approx 800 dollars, but this one is only 145usd with your choice of USB or RS232 cable.
Here is what the software does.
Functions:
Parameters depending on ECU:
RPM
Air Flow
Air Flow Right Hand
Water Temperature (C or F)
O2 Sensor
O2 Sensor Right Hand
Speed (KPH or MPH) with tyre size correction
Battery Voltage
Throttle Position Sensor
Fuel Temperature (C or F)
Intake Air Temperature (C or F)
Exhaust Gas Temperature
Injector Time
Ignition Timing
AAC Valve
Air Fuel Base
Air Fuel Base Right Hand
Air Fuel Base Self Learn
Air Fuel Base Self Learn Right Hand
Injector Time Right Hand
Duty Cycle
Duty Cycle RH
O2 Sensor B1
O2 Sensor B2
Registers:
Closed TPS
Power Steering
Air Conditioning Switch
Start Signal
Neutral
Air Conditioning Relay
Fuel Pump
Thermo Fan
VCT
Waste Gate Solenoid
Air/Fuel ration (lean/rich)
EGR Solenoid
- Data Logging
Parameters and registers as per Data Display
- Active Test
Engine Temperature
Timing
AAC Valve
IACV Valve
Air/Fuel Base
VCT
Fuel Pump
Cylinder Off
Base Idle Adjustment
clear Self Learn
- Self Diagnostics
Read Fault Codes
Reset Fault Codes
- Speed Trial
Measured times (kph or mph):
0-60
0-100
40-120
0-xx
- Rom Data
Slow Data Download (1 byte at the time)
Fast Data Download (8 bytes at the time)
- Address Watch
Any address in CPU memory
- Active register test
Discovers parameters supported by the ECU
- Map trace
A real time trace of a position on the map. This function is only available for z32 300zx cars at the moment. If the real time TP value address is known the function can be set up to work on any Consult I Nissan car.
Advanced functions
-
Read the ROM data from your ECU
-
Monitor your ECUs heartbeat with map trace functions (Only on Z32, but others coming)
*Test your cars performance with a very flexible speed trial. Dial in your own trigger speed, or use one of the preset ones, press start and go! When the nominated speed is reached the timer stops. Made accurate by tire size correction settings.
*Get into the heart of your ECU and watch data at address locations change. Record their min/max values along the way.
Data logging
*Record your cars vitals with the datalog feature. Easy to setup and start, any parameter that is recognized can be recorded. Go for as long as you like, only limited to your laptops free memory.
SYSTEM REQUIREMENTS: WIN98, ME, 2000 and XP
Here are few pictures,
[ http://i11.ebayimg.com/04/i/04/7f/25/f3_1_b.JPG ]
[ http://i3.ebayimg.com/03/i/04/86/0b/50_1_b.JPG ]
[ http://i22.ebayimg.com/01/i/04/85/a4/bd_1_b.JPG ]
[ http://i12.ebayimg.com/01/i/04/85/04/9e_1_b.JPG ]
This software will work on any Nissan from 1989-1995 including JDM cars, such as theZ32, R32 skyline rb20det, rb25det, rb26dett, altima, maxima, nx2000, an money other models.
This software is ideal for
- The enthusiast who wants to learn more about their car’s performance and upgrade effectiveness!
- The owner who wishes to avoid expensive dealer charges can read your own service codes!!
- The racer/drifter who needs more out of their car!!!
- The mechanic who needs a comprehensive diagnostics tool for Nissans!!!
If you have any questions, please feel free to contact me at rafi2247@rogers.com
If you would like to pay through paypal, please add 3%, shipping is 15usd any where in NorthAmerica.
Thank you,
Rafi