hey guys are you mad at how hard it is to find HC3 bulbs and when you do find them the expense of them
they are few and far between
Well enough rambling
this is one of the easiest mods i have ever done
first thing you will notice is that h3 bulbs have one wire this wire is your positive wire (+)
these bulbs rely on the housing it sits in for a negitive/ground (-)
if you look at the back of the housing for the fog light you will notice there is a little tab on the bottom of the housing
all you have to do is attach a female spade conector with a wire to the tab and run it to the negitive wire for the fog light (old pop up motor wire)
and the positive wire from the bulb to the positive wire
and thats it enjoy your new cheep bulbs
i think this can also be done with the low beam but there is no tab but there is a little screw that i can can get a ring terminal on for a ground i’ll test it out and post results
hope this helps.
M.Large