What does that have to do with anything? Every source still says it’s thinner at cold temps.
is tested at a much colder temperature. For example, a 5W-30 motor oil performs like a SAE 5 motor oil would perform at the cold temperature specified, but still has the SAE 30 viscosity at 210° F (100° C) which is engine operating temperature. This allows the engine to get quick oil flow when it is started cold verses dry running until lubricant either warms up sufficiently or is finally forced through the engine oil system. The advantages of a low W viscosity number is obvious. The quicker the oil flows cold, the less dry running. Less dry running means much less engine wear.
I can’t tell you how many times I have heard someone, usually an auto mechanic, say that they wouldn’t use a 5W-30 motor oil because it is, “Too thin.” Then they may use a 10W-30 or SAE 30 motor oil. At engine operating temperatures these oils are the same. The only time the 5W-30 oil is “thin” is at cold start up conditions where you need it to be “thin.”
I’m saying that an inch is shorter than a foot, and you guys are telling me they can’t be compared because they are measures differently. :facepalm