shout out to the guy that says i use camera tricks

[deebo]

@turbociv

Fine Jason, ill bite since you took this public. Did you look at the pictures of your amazing welds? did you notice the severe undercutting? did you notice the discoloration on the penetration from either not moving fast enough, not enough argon, too much heat, dirty gas lense? why aren’t you capping your welds after the root pass? I can be a dick and pick your shit apart as well. do people realize all that pretty coloring is actually oxygen contamination to the weld? do they realize that it mostly wipes/buffs right off? maybe you should use your Nikon and filter that stuff out better. your not a fabricator, your a pipe fitter by trade and a glorified muffler man. whats the last project that you have completed jay? how about your civics?..or how about your 240’s?.. or how about your Yamaha xs65?.. or how about jacks srt jeep that had miles of pointless tubes and bends and pointless pie cuts that you put in because you insisted it “looked good” that eventually jack had to pull the plug because you were bastardizing his jeep. How about not even knowing how to hook up wastegates and what proper material should be used in certain situations? should I keep going? how about how you used me for my dyno so you and all your broke ass high school drop out friends could use my shit for free only for you to drop off the face of the earth for months to reemerge as “filthy habbits fabrication”? yesterday was alexa bday right, Did she ever get to meet Beth beacause id be more then happy to introduce them. fucking keep pushing me jay. you can thank your best buddy jnj for fueling this aswell. but don’t worry, he is going to be put on blast as well.

yea, probably why hybrid was so successful huh?

how much did I charge you again for all those dyno tunes for you to be runnin around at 500whp for all these years like your the mother fucking man? oh yea, $0.00 is what I charged you. maybe I should try to collect on some of that?

for someone I looked up to I realy expected more from you gary. You were family to me.

consider yourself lucky, jay promised dave a whole bunch of fab work in exchange for those tags but after he received his tags never came through for poor dave. he has been waiting for months and keeps getting ignored. I know this because dave came to me to get the work finished that jay promised. dave had over 20hrs into making those logos for Jason.

Anyone else? cougerspeed? did you forget who fabricated your lsx rx7 for payment of only $1g? did you forget I let you rip my dyno for free and how I helped you achieve your 975whp? its funny how everyone forgets how much ive done for them while there all riding the bandwagon. Its actually made me grow quite bitter over the years. I guess from what im told im a pretty big dick now because of it.

I don’t think anyone is not taking your side… They are just saying that jay does good work. No one ever said you didn’t do good work …

But I think this post kind of ruined it you know, especially ppl that I assume are your friends. No one said anything bad at all.

Ppl are allowed to admire the work of others

Sent from my iPhone using Tapatalk

[LZ1]

Instead of fueling stupid drama you both would be better served posting the great work both of you do on a regular basis.

[Onyx_Z32]

Let’s do this:

[turbociv]

This thread was created to blast me. Any of my “friends” who came in here to give jay props are indirectly putting me down. these people know who they are and they def knew what they were doing when they involved themselves in this thread.

[BREETIME]

@turbociv

This thread was created to blast me. Any of my “friends” who came in here to give jay props are indirectly putting me down. these people know who they are and they def knew what they were doing when they involved themselves in this thread.

Then don’t lose your cool and decide to rant about me. Your problem is with them.
Returny text. Since the forum can’t keep it on topic we should talk in person.

[cougarspeed]

@turbociv

Anyone else? cougerspeed? did you forget who fabricated your lsx rx7 for payment of only $1g? did you forget I let you rip my dyno for free and how I helped you achieve your 975whp? its funny how everyone forgets how much ive done for them while there all riding the bandwagon. Its actually made me grow quite bitter over the years. I guess from what im told im a pretty big dick now because of it.

As a friend who still backs you daily im not sure why you involved me in this? I have known the both of you for many years and think you are both solid people from my experience. I am not in the middle of this feud.

[IanK]

Bro Bro Bro…turn down tips.

[Devioustsi]

All I said was plus karma… Aimed at the fact the he does good work and does not cut corners. John if you would like to hold something against me that is because of your own buisness practice. Then so be it. You already hold it against me for helping Deebo out on his new car that he had to pick up after you know what… All I did was accept a job that I’m qualified to do and hold myself to it.

[ItsOver]

@IanK

Bro Bro Bro…turn down tips.

[Carbonfiberhooded]

Can’t we all just get along?

I’ve never had work done by either of you, but from everything I’ve seen, you both do excellent work. Take pride in your own shit and just keep doing what your doing!

who’s this dubioustsi guy??!

[Carnut]

What Jay said was pretty spot on in my opinion and all I had to say was well put, because it was.

John, you can say whatever you like about me, Hybrid, Gary but if I recall we HELPED you on many occasions and never asked for anything in return. So I guess that is the thanks we get. Lesson learned.

[dirtye30]

Jay turned me on to 3-6 Mafias “Slob on my knob” when we were in grade school. His mom made me breakfast before a HT meet as well.

[SPDboy]

When the fuck was there free dyno time? I guess I missed that post…

[BREETIME]

@dirtye30

Jay turned me on to 3-6 Mafias “Slob on my knob” when we were in grade school. His mom made me breakfast before a HT meet as well.

I honestly don’t remember either of these…but that does sound like me, and that does sound like my mom

[turbo_ls1_ss]

Wow! I will most likely have you finish weld something I fab up in about a year :tup: I’ve been tempted to buy a TIG, but I think I’ll send it your way instead!

[system]

I’m still really upset you were so booked up before I left for CA. I really want a FH exhaust on my CB450.

[BREETIME]

@turbo ls1 ss

Wow! I will most likely have you finish weld something I fab up in about a year :tup: I’ve been tempted to buy a TIG, but I think I’ll send it your way instead!

good to hear.
buy one anyway.
knowing how to tig weld is like being the only guy that can drive 5spd in an emergency. ok, not that good. but its good…id be more than happy to show you the ropes.

@maxwell

I’m still really upset you were so booked up before I left for CA. I really want a FH exhaust on my CB450.

I wish we could have done something too…im still catching up on projects that were on my plate from back then.

[system]

@BREETIME

I wish we could have done something too…im still catching up on projects that were on my plate from back then.

I’ll be back eventually. This is an experience/resume builder/perspective thing. Even if it’s not Buffalo (eastern NY is home) i’ll be back.

Hopefully I don’t lose interest in the bike by then, lol

[donkeyballs69]

@BREETIME

Like I figured. You came back with more nonsense. Making fun of my stuff for no reason. Just to seem like you’re better than me.

If you’d like to pick on each others work we can do that. But I promise you, I am way better at picking out imperfections than you are.

I simply made this thread because I was tired of you bashing my name in public forums. And calling me a n igger on Facebook.
And once again it’s proven you can’t just keep it on topic. You have to lose your cool and take it personal.

please John…do not get personal with me.
I would never ever take a stab at your personal life and the events that unfolded. So please, keep it professional.
Honestly, it’s sad that you had to take it there. You show everyone how weak you are and how low you will go to win.
Funny to me how you can make fun of my penetration color. When you have zero penetration.
Funny how you can call out my undercut. Can you show me some?
And I don’t do “root” passes. That is a weld. It’s done. It doesn’t need a cap.
I’ll give this more explanation when I’m not on a phone.

Will you still be doing fab work this winter? I have a pretty cool build I want to do.

John same question for you also… You both do great work and not sure who is booked up for the winter or not.

[turbo_ls1_ss]

@BREETIME

good to hear.
buy one anyway.
knowing how to tig weld is like being the only guy that can drive 5spd in an emergency. ok, not that good. but its good…id be more than happy to show you the ropes.

I appreciate that! I’ve been trying to get Straight Welding to take one of our CP-302 MIG machines in on trade towards one, but they are bending me over on trade value. I’ve thought long and hard about it, but have too many other purchases and expenses that take priority. Years back I MIG’d for about 2-3 years at work before moving to the office, and I was tinkering with a J&J’s Dynasty 200 when I had the last car. Definitely something I’d love to get good at, but it’s just not a purchase I see happening anytime soon.

If you know anybody that wants a Miller CP-302 with a 22A wire feed, cart, and extended grounds, let me know. It’s a very nice machine, we just have too many of them. Sorry to hijack!