Thanks for the props Ollie! Car and the pics look fly!
Thats the body panels fault. Look at the center chrome body line, then look at the rear arch and the front arch. The front is cut much higher than the rear, making it look raked. Same as the EVO10, look at a side pic of them… they are like 2+ inches higher up front VS the rear. If the car was on air, and laid frame, you would still see tire up front and wheel out back. As it is, the car got high centered on my 220V extension cord driving over it pulling out of the shop! There is a reason, hot rods are channeled, body dropped, and sectioned to look slammed… lowering the suspension to achieve the look can only go so far.
Time to get some extra front fenders and cut them up! Add the difference in material (body center line VS front & rear wheels arches) in to the fender, to drop the front wheel arch, then cut the difference out of the bottom at the frame… thus move the fender arch down to match the back. Alot of work, but holy shit would it be baller. From a rough est from the pics, its about 1.75" that the front arch has to drop to match the rear.