6spd_ek  
                
               
              
                  
                    November 13, 2012,  7:33am
                   
                   
              21 
               
             
            
              you can use either a LS harness & wire in vtec or use the GSR harness.  Without seeing the motor in person I can’t tell you which year but if I had to guess it would be OBD-1 (94-95)
             
            
               
               
               
            
            
           
          
            
            
              Thanks greg, here is 1 pic i’ve got, i’ll take some more tonight. 
             
            
               
               
               
            
            
           
          
            
            
              Is your 79 civic carburator
             
            
               
               
               
            
            
           
          
            
            
              
You’re asking noob/NickAlero questions pertaining to “boost”.  15lbs of boost on a HTA86 and 15lbs on a .50 trim are two different things.  15lbs on a K20z1 with it’s 11.0:1 compression vs. that 15lbs on a stock GSR B18c1 is going to produce different power and have different reliability.
The K series motors are pretty strong stock.  There’s guys making 500whp+ on stock K20a2/z1’s and K24a2 bottom ends w/ K20a2/z1 heads and are reliable.  Shit, my old K20z1 swap in my EG took a 100 shot of nitrous for a LONG time before something happened with the timing in the tune, and even then the bottom end was fine.  I did Wiseco pistons and Eagle rods in that and that’s all you’d really need to do to one of those to have it be reliable.  Definitely under $1,000 for the pistons & rods, then new bearings and any machine work you’d need to have done.  You’d need to factor in the cost of K-Pro as well(~$800) which is a must need for tuning a K series.
Edit: 
IMHO, this car would be retarded and almost not even fun with a turbo K series.  You said your buddy has a K24 laying around…A K24 bottom end(stock rebuild) with a K20a2(02-04) or K20z1(05-06) head on it, with an RBC intake manifold, header, 2.5" exhaust, K-Pro and if you really wanted to maybe some mild cams & aftermarket valvetrain like Blueprint stage 2’s or something .  This car would fucking hammer with that set-up, and be fun as shit at the same time.  I was big into the K series a few years ago when I had mine.  I would really like to build another car with a K at some point, they’re extremely fun to drive N/A.  Murrdog9000 had a K24/K20 coupe that was N/A then he built it and boosted it and I’m pretty sure he’d agree with me that it wasn’t nearly as fun as an N/A K series.
 
 
Completely agree… Car was much more fun N/A