sr passed etest today... numbers inside.

stock sr.
atmosphere bov
3 inch apexi n1 dual
3 inch hks down pipe
3 inch magnaflow highflow cat

         limit     result

hp ppm 318 114
co% 2.52 .55
no ppm 3353 2270
rpm 2739

curb idle test
limit reading
hc ppm 300 92
co% 1.50 .10
rpm 1075

both dilutions were 15

The car was tested under hotrod… so those are the current hotrod limits.

Dam I should post up my numbers, they were a lot lower

Thanks for the update chief. :hsugh:

Here are my comparison on a fully stock SR w/ magnaflow cat:

Running:
HPC: 123 (Limit: 305)
CO %: 0.66 (Limit: 2.42)
NO ppm: 2531 (Limit: 3215)

Idle:
HPC: 268 (Limit: 300)
CO %: 0.61 (Limit: 1.50)
NO ppm: N/A

edit… double post wtf

I’ve got’cha both beat…

HC ppm limit = 318 reading = 55 (Pass)
CO% limit = 2.52 reading = 0.12 (Pass)
NO ppm limit = 3353 reading = 1024 (Pass)

curb idle
HC ppm limit = 300 reading = 35 (Pass)
CO% limit = 1.50 reading = 0.00 (pass)
NO pmm limit = N/A reading = N/A

I win

HC ppm limit = 64 reading = 51 (Pass)
CO% limit = 0.35 reading = 0.04 (Pass)
NO ppm limit = 485 reading = 406 (Pass)

curb idle
HC ppm limit = 200 reading = 52 (Pass)
CO% limit = 1 reading = 0.30 (pass)
NO pmm limit = N/A reading = N/A

i win 3 inch down pipe 3 inch gutted cat 3 1/4 inch exhaust.
mines tuned ecu. if you know anything about these they arent kind on gas at all.also stone cold. failed by 60
luckly it was just the test at school

I had a test done this year.

Running stock SR w/ 2.75" exhaust (no cat), AEM EMS (3-bar MAP) and 740cc injectors as far as ‘big’ mods go.

You ready for this?

2007

Running:
HPC: 157 (Limit: 305)
CO %: 1.93 (Limit: 2.42)
NO ppm: 1793 (Limit: 3215)

Idle:
HPC: 1478 (Limit: 300)
CO %: 4.62 (Limit: 1.50)
NO ppm: N/A

Did pretty :cool: as far as running but fucking owned on idle. :rofl:

Running clean is for Nancies. :o

wow… looking at all of you guys’ limits i should’ve done mine under hot rod i would’ve passes non problem if that had been the case. i asked the guy who did my e-test about hot rod setting and he said the limits wouldn’t change that much. how did you guys get them to test your car under hot rod? Cause i passed everything under being tested as a ka except the nox readings limit was 350 or something and my reading was 1560.

Jon

yeah hotrod would see you passing.
gonad your stock setup was pretty much like mine.

Aem showed you a great idle tune eh ? lol

i plan on etestin my sr 240 next week
i have a 3" downpipe with 3" hi flow cat and dunno wat size exhaust
do i just ask the guy to run it under hotrod specs or what
wat do u guys think?

Since you are in Brampton, go to the CT at Shoppers World.

Usually young guys are working there and should be no problem convincing them to run under Hot Rod.

Try to find a brown guy working the e-test machine. :wink:

i gotta get my car e tested as well if find a cat 3inch for cheap ill take it to a shop i used to work at and put it on practice mode to see how it does if it passes ill do it in the regular mode if it doesnt thennn i shall do it another way.

its brampton of course there is a brown guy running hte e-test machine
i know a few htat work at that canadian tire.

nice then i guess im goin to ct at shoppers world
now i have a hiflow cat is it goin to make it harder