transmission issues

Completed my manual conversion , finally . I am having some difficulty hooking up the reverse lights , I am still browsing through the service manual to find the plugs but that’s minor for now .
My shifter vibrate a lot , that is my first manual s13 and was wondering if that was normal . Holding the shifter while driving is very unpleasant . Another problem that I am having is that , when starting the morning , the transmission is a little hard to put through gears almost as if it was grinding a bit , That feeling goes away after 5 to 10 min of driving . What could that be?
Thanks for reading

reverse lights, nicoclub.com ->convertible S13 ->5spd swap sticky I believe.

shaking I don’t know, probably not good

trouble finding gears? hmm, some times I have to double clutch (diesel truck style) to get it into 1st/reverse

RWD shifters shake a bit because they are directly conected to the tranny, unlike FWD trannies which are usually conected by cables. the cables absorb the vibrations.

As for the grinding and grumpy-when-cold shifting: Welcome to slightly worn S13 trannies! Combine cold thick fluid with worn syncros and you get slow shifting until the car warms up a little bit.

It’s all good than , can’t really complain because I got a killer deal on that tranny. I just got to double clutch till warm and start ripping the gears after , Will adding the lucas tranny fluid have any effect ? I was also told to upgrade to red line .

on a related note.

what can be done about sloppy shifters ? I like my shifting to be toight, like a toiger. I want to feel a solid click click as I move from one gear to another, what can be done to get rid of teh fluh feeling on a sloppy shifter and tighten it up?

get a short shifter and make sure that little plastic bushing that goes on the end of the shifter isn’t worn out.

And get some fresh Redline in there. :wink: It really does help.

get a short shifter and make sure that little plastic bushing that goes on the end of the shifter isn’t worn out

Is that for my problem or for scribbles ?

BTW : thanx a lot S13GG , that helps a lot more that the service manual