Turbo Help

NYSpeed Automotive
1

ok so i want to get a bigger turbo for my teg but i dont know what iam getting a bigger intercooler and moving up to i think 3in pipe’s from 2in i dunno what turbo i should get i need your help what would be a good size or whatever i want to run around 500-600hp here is my set up now iam at around 400+ on 12psi lmk what you guys think i should get

Motor/Tranny:
-1997 JDM Integra Type R
-Hone and Bore .020"
-CP 81 1/2mm. Pistons
-Eagle Connecting Rods
-ARP Headstuds
-Golden Eagle Block gaurd
-New in 2005:
(OEM valve seals, Honda gasket set, Water pump, Oil pump)
-RC 750cc Injectors
-Edelbrock Victor X Intake manifold
-Edelbrock Fuel Rail
-Holley fuel pressure regulator
-B&M Fuel Pressure gauge
-Hasport Extreame Motor Mounts
-Walbro 255 High pressure fuel pump
-ACT Springless 6puck clutch heavy duty pressure plate
-New C/V Shafts

Turbo/Cooling:
-Turbonetics T3TO4E turbo (57/60)
-Drag3 Exhaust Manifold
-Drag3 Air intake
-HKS SSQ Blow off valve
-Tial 38mm Wastegate
-Drag 3 spearco bar and plate intercooler (core is 22x7x2.5 inches. inlet is 2.25 and outlet is 2.5 inches. total width of intercooler with cast endtanks is 27 inches.)
-KTeller 3in. stainless steel exhaust
-3in. magnaflow muffler
-Custom stainless turbo piping by Hybrid
-Nitrous Oxide Pre cooler system

2

You will want a 35R and a decent exhaust manifold. You don’t want 3.0" intercooler piping. 2.5" will work just fine.

3

yea brian, go with the 35r, same turbo kev has. and get your charge pipe fixed on the cold side. i think it would probably be a good idea going up in size on the fmic. ill drop u a pm in a bit with some more info

4

Definitely agree on the piping diameter for sure.

Turbo…I think the 35R works great on some apps, but OK on others. It’s becoming the new universal band aid turbo like the E57 trim was for years.

5

i think u should hook a nigga up with some of your old turbo parts if you upgrade :wink: