Ok I am putting a turbo kit on my 93 5.0 ho engine and I dont know where to get a tune and what size turbo to use I got bov, wastegate, ect…
If some one could make a exact list of what I need…
Thanks
:snky:
lol
BUY A KIT
Hellion makes a nice one. pick up a 5.0 mag and look for adds
Check out Bg custom turbo. They have a 70mm kit on sale now for cheap.
do some research and save yourself the flaming your are going to get for posting that on here. <—good advice
buy a kit…or research research research!! dont blow up a turbo like i did a few years ago
do us all a favor and go on corral.net there is everything possible and tons of users. you seem like you do not wanna spend alot of money. So you ar aware many things come into play. You will need all the piping hot and cold. some sort of fuel management. Also fuel pump, injectors, etc etc etc. i think you should do some more research and figure out what you really want out of the car. Going turbo isnt for everyone and will severely cost you time, money, and the stress of unreliability. Most people are going to flame you really bad. I am not trying to shoot your idea down im just saying that you should really make sure you know what you are doing. I suggest talking to someone like bdr5oh or muscle 50 and find some reliable information. spend your money wisely and you might get the end result your looking for. Dont get sucked into cheaper kits that mount on the car but eliminate tons of shit and require excessive mods. Check kits like helion and other reputable places. dont buy something on ebay for a grand and hope it works because unless you have the time knowledge, and money to fabricate and trial and error, you will be broke and slow.
in b4 the thread get outta control.
ok like i said i have all the stuff needed for a turbo kit i just dont have the turbo its self i have all piping, fuel management, bov, wg, intercooler i got all the stuff i just dont know what size turbo to use like i said^^^^^^^ the hot side is made for a t3/t4 but thats all i really know about turbos and my piping. Also how much and where can i get it tuned i only want to run 9psi for this summer
thanks
you realy should have done more homework before buying parts.
few simple questions here:
how much power do u want ?
whats the intended use of the vehical?
what size is all your piping?
name the exact parts you already have … like brand and model
Brian
if this is not a full, brand name kit it will not work as a direct bolt on. what size piping, exhaust, intercooler, hp goals, engine management, these things are important. i mean at this rate you can be looking for any ind of turbo. is this a stock motor, start small. if its a built motor go bigger. just figure out your goals otherwise your going around your ass to get to your elbow
well the kit was custom made for a 95 mustang its goin to be my daily driver 4 a wile durring the summer i just want about 9psi and the engine is fully rebuilt with a mild cam in it
not sure but some of the 5.0 motors from 95 do not also work with foxbodies. seems you have a good start. just decide what kinda power, and what kind of fuel system you want and get her going.
well i just want to get a decent amout of power enough to get a good street race goin
i dont know what you mean by fuel system cant i just use the stock one???for now???
dont you own the tiger stang?
if you dont even know what fuel system mods you need …you really need to study more at this point
what peak hp do you want
do you want off idle, midrange or top end power ?
also, like i asked before, name the specific parts you already have, everything has to work towards the same goal, mismatched stuff just maks your job way harder
your the same age as me and have the tiger stang, (i thought i was bad) good luck to you
:roll2: your one to talk
im gonna have to say that you two are probably on par with each other right now.
signed~
“some stuck up snobby rich kid”
.