Universal Power/Performance Parts + 240/SR Specific

Classifieds
1

I have a ton of stuff, probably will take me a full day to get pictures/price/upload/post everything so i’ll break it down into 2 parts. First will be just universal stuff not specific to 240/SR since i’ve already gathered all that info to post other places and later on i will update this with all my 240/SR stuff, or at least some parts to start.

I AM LOCATED IN WINDSOR

Borg Warner/Bullseye S366 Turbo
Never used.
Divided T4 Outlet.
Believe it’s a .9x A/R turbine.
Comes with oil return flange/gasket and turbine vband outlet/clamp



$1000

Aeromotive Eliminator Fuel Pump
Used but in good working condition.
Comes with inlet and outlet fittings (Believe -10, need to verify)

$380

Aeromotive Compact FPR
Used but in good working condition.
Comes with -6 fittings

$110

Aeromotive Fuel Filter
Used. Don’t know the part number so no idea on micron filtration etc.
Comes with 2 -8 fittings

$65

Trick Flow Fuel Filter
New in box.
Part number TFS-23005

$60

Earl’s -4 Filter
New in box.
Part number 230304ERL
Great for turbo oil feed.

$25

K&N Air Filter
New in box.
4" Inlet, 5" in length, conical shape

$35

MSD Wire
New in box.
8.5mm Super conductor plug wire
25ft.
red

$40

MSD Boots
4 Straight boots
4 90 degree boots

$20

2 - XO Racing Knockoff Wastegates
New.
44mm
Believe there is some springs that come with it.

$50 each

Greddy RS BOV
Have no idea where I bought this, I can’t say it’s new with 100% certainty but it doesn’t look like it has ever been used.
New gasket
No flanges.


$120

Cooling Mist Meth/Water Injection Kit
Used (Barely)
Comes with all the parts, some misc. hoses and extra injector nozzles. If interested i’ll get a break down of every piece.

$230

Autometer Carbon Gauges
Used, faces in great condition.
Boost, Oil Temp, Oil Pressure.
All gauges come with the needed fittings, senders, sensors. Only thing missing, boost needs new hose.


$40 each

Blitz FATT DCII Turbo Timer
Used, good working condition.

$45

Professional Products Mustang Throttle Body
New, never used.
3" inlet
Comes with all gaskets and misc parts.
Also have used mustang IACV that fits throttle body if needed.


$110

DMH Electric Exhaust Cutout
Used but in good working condition.
3"
Comes with Y pipe, block off plate, cutout/switch etc.
Does not come on the downpipe pictures

$130

Catco High Flow Catalytic

$SOLD

Innovate Motorsports LM-1
Used, still works perfectly
Comes with everything needed including bosch wideband o2 sensor.

$100

Precision Turbo Intercooler
New. Bar and plate design.
Bought this as a core started building my own end tanks and mounts, never finished.
Core Size is 4.5" deep, 12" tall, 16" across.
It is mostly complete minus a piece of round aluminum welded to endtank for IC piping
Has a flange welded on to fit the greddy BOV
If anyone is interested in this I will gladly help with LIGHT modifications of the endtank & welding, welding of the pipe connector at endtank and welding of brackets to fit your vehicle.



$315

Summit Linelock
Used, works.
Missing all the little crimps and switches that would come with it

$20

Precision Turbo 1000cc Injectors

$SOLD

DSM Injector Box
Used obviously

$10

If you’re interested in anything PM me, don’t post here. Thanks.

2

I’ll use this post for all the S13/SR20 Stuff I have.

Again, i’m located in Windsor and will gladly ship in Canada. Must make payments with EMT though, no money orders and no paypal.

I’ll continue updating this post with new stuff as I dig it up, take pictures, etc.

Whiteline Front and Rear Sway Bars S13
Used, good condition for something that was under a car.
I have all the nuts/bolts/bushings, ready to bolt on

$300

SR20 IACV
Used.
Have 2 of these.

$10

Greddy Oil Pan - SR20
Used. Excellent condition.
Hole drilled and tapped into top of pan for a -10 oil return. Can easily be capped off with a $3 -10AN cap from princess auto.


$200

Z32 Master Cylinder
Bought as a refurbished/rebuilt unit.
Honestly, not sure if it is 1" or 1-1/8"
Tokico.


$100

AEM EMS Version.1 - SR20
Used, great condition
Still have original box.
Serial on this is #3 for SR20. This is real OG shit.
Comes with GM 3 bar map, boost solenoid and AIT




$875

Ichiba 5 lug hubs
Used (barely)
Car was driven very little with the 5 lugs, always on jacks, grease inside is still perfectly new.


$300

OEM SR20 Fuel Rail

$15

SR20 Intake Manifold
Found this so figured i’d throw it up in case anyone is crazy enough to try.
It was my (unfinished) attempt at building my own intake manifold for the SR.
It’s been so long I don’t remember the volume of the plenum.
All it really needs is a throttle body flange and vacuum ports.
Was going to use the 3" mustang throttle body and IACV I have posted above on this.
Each runner has venturi style intakes that you can see in the picture, don’t want to even think about what those cost me.



$150

Sard SR20 Top Feed Fuel Rail
Used
Comes with a -8 and -6 fitting (need to verify)
Can also be run as a dual feed with a return on the middle (which is currently capped)
SHOULD have all the parts (spacers) for this. If you’re interested PM me and i’ll double check, I know I saw them.


$120

NGK BKR7E Plugs
New in box
24 BKR7E plugs + 4 VPower R5671A-8 Plugs

$40

Nismo S13 SR20 Engine & Tranny Mounts
Used, good condition.



$225

S13 DOHC Cluster
Used (imagine it wasn’t?)
Perfect for a SR20 swap into a 89-90 SOHC S13 to get a OEM Tach.

$100

Hotpipe
Used.
I THINK this was from enjuku long ago.
BOV flange welded on

$30

SR20 HKS Flywheel
Used.
Alright, I used this thing for all my sr20 days, it has holes drilled in it to “balance” it which was a mistake by a stupid machinist BUT it was fixed by a much more knowledgeable guy (reason for welds filling in holes).
Had no trouble/balance/rev issues when my car dynoed
Video of car the last time it ever ran
http://www.streetfire.net/video/sr20-gt3071r-tuned-by-eviltom-and-u2ndyno-and-kat_129189.htm
Some feel good depressing nostalgia right there, going to go cry now.
Not sure why I posted that…


$200

SR20 Tomei 260/260 ProCams
Used.
These have light wear marks on the journals but nothing crazy and gave me no issues


$210

SR20 Tomei 270/270 ProCams
Used. Sort of.
WTF was I thinking?
These were only used for a 3-4 hour dyno session, car retired afterwards.
No pics, still installed in cylinder head which is at my parents house.

$240

R32 GTR 5 Bolt Wheel w/Tires
Used
Awesome condition, have all 4 center caps with the weird tasty air foreign sayings.
Has Kumho Supra Ecsta 712 Tires in half decent shape, very driveable.
If anyone is really interested I can take pictures of each individual wheel for better inspection of condition.



$550

Will update later with more as I dig stuff up and grab boxes/stuff from parents house.

Just a heads up of other things…

Front z32 brakes/rotors, amazing condition
Refurbed oem 240 rear calipers with 5 bolt rotors
Nismo 2 way LSD installed in 1990 240sx open diff
Fully built sr20 head - new guides/valves, light machine work, ferrea dual valve springs/retainers
Built bottom end - eagle rods/cp pistons
z32 tranny
3 s13/sr20 transmissions
spare sr20 bottom end

3

interested in meth kit and cutout. Please pm me. I tried to pm you but it won’t let me for some reason. So pm me an email so we can discuss meth kit and cutout. I’m from chatham.

4

bump

5

Will u ship the 5lugs?

6

interested in line loc. pm if you still have it.

7

bump.

Please PRIVATE MESSAGE me if you are interested in something or have a question, that way I get an email notification and can answer right away, I don’t come and check this post.

8

Free bump for a legit seller.

9

bump.

Lots of stuff still sitting in my living room!

10

bump. there is some legit amazing parts here for good prices.