85StangGT's 306

so im bulding an engine thats goin in the stang… and im also usin this as my senior project so i figured id put the pics on here…anyways its a 302 bored 30 over w/ speed pro forged pistons,eagle rods,total seal rings,clevite bearings, the engine is balanced and the crank was polished. here is what i did so far… im just waitin on the cam to come and the heads back from the machine shop so i can do the rest.
http://www.pittspeed.com/uploaded/block.bmp
![http://www.pittspeed.com/uploaded/bearing install.bmp](http://www.pittspeed.com/uploaded/bearing install.bmp)
![http://www.pittspeed.com/uploaded/crank install.bmp](http://www.pittspeed.com/uploaded/crank install.bmp)
http://www.pittspeed.com/uploaded/torque.bmp
![http://www.pittspeed.com/uploaded/ring install1.bmp](http://www.pittspeed.com/uploaded/ring install1.bmp)
![http://www.pittspeed.com/uploaded/bearing install1.bmp](http://www.pittspeed.com/uploaded/bearing install1.bmp)
![http://www.pittspeed.com/uploaded/piston install.bmp](http://www.pittspeed.com/uploaded/piston install.bmp)
http://www.pittspeed.com/uploaded/torque1.bmp
![http://www.pittspeed.com/uploaded/bottom end.bmp](http://www.pittspeed.com/uploaded/bottom end.bmp)

looks good

x2

Nice work

cool.

Nice idea for your senior project :slight_smile:

ok so now i got some stuff from summit. i got a Ford Racing E-303 cam which i put in…FRPP roller rockers and FRPP pushrods, and a comp cams double roller timing chain…
![http://www.pittspeed.com/uploaded/cam install.bmp](http://www.pittspeed.com/uploaded/cam install.bmp)
http://www.pittspeed.com/uploaded/thingy.bmp
![http://www.pittspeed.com/uploaded/timing chain.bmp](http://www.pittspeed.com/uploaded/timing chain.bmp)
http://www.pittspeed.com/uploaded/rockers.bmp

Nice looking engine. Block would look good in Ford Racing Blue though IMO… but who am I to be picky? That’s badass regardless.

actually thats exactly the color i planned to paint the block and the intake manifold

nice shit!i’m building my engine and using it as a senior project to.

so i got the heads back, installed them yesterday, and put the lifters back in
![http://www.pittspeed.com/uploaded/head install.bmp](http://www.pittspeed.com/uploaded/head install.bmp)
![http://www.pittspeed.com/uploaded/torque heads.bmp](http://www.pittspeed.com/uploaded/torque heads.bmp)
![http://www.pittspeed.com/uploaded/spider tray.bmp](http://www.pittspeed.com/uploaded/spider tray.bmp)

looking good!

:cool:

sweet

lookin good

thanks guys!

Very nice.

just installed the rockers/pushrods today.
![http://www.pittspeed.com/uploaded/engine rockers.bmp](http://www.pittspeed.com/uploaded/engine rockers.bmp)

my motor is just about finished. i put on the timing cover, oil pan, and new water pump. i also got some spiffy valve covers:yum: and an edelbrock performer rpm intake. i just put on an old carb i had laying around and an air cleaner. im probably gonna go with the stock air cleaner with the dual snorkels, and i still have to buy a carb. now its time to paint the engine
http://www.pittspeed.com/uploaded/oilpan.bmp
![http://www.pittspeed.com/uploaded/valve covers.bmp](http://www.pittspeed.com/uploaded/valve covers.bmp)
![http://www.pittspeed.com/uploaded/complete 1.bmp](http://www.pittspeed.com/uploaded/complete 1.bmp)
![http://www.pittspeed.com/uploaded/complete 2.bmp](http://www.pittspeed.com/uploaded/complete 2.bmp)