Anyone interested in taking a basic class on welding? It includes a practical teaching session with a handout, demonstration and if you’re not totally incompetent - some practical.
It’s hosted by HADA and Diamond Auto Fab and is free of charge. HADA hosts a number of Tech Session over the year designed to give people not used to working on cars some practical experience before attempting any big jobs on their own. So far this year we’ve disassemble a wrecked race car, swapped a motor, did a complete brake upgrade including larger rotors, mc, booster, SS lines and a full suspension swap. Next lesson…welding.
It’s on Sunday May 28th at 11:00 at Diamond AutoFab in Pickering.
The address is:
1031 Brock Road, in Pickering. (NOT Brock street in Whitby, about 10 minutes away)
Directions:
401 East to Brock RD, Go south about 1/2 KM. 1031 is on the East side of Brock RD the place is next to the Hertz car rental. The shop is temporarily at Marcus Car Care (until new unit is ready in late 2007).
We’re looking at only 15-18 people per session.
If you have any problems call Steve at: (416)561-4566
If you can beg, borrow or steal a welding mask then do so. Otherwise, attend with at the very least a pair of safety glasses. There will be spares but not many. If you have spares, then bring them.
Hope to see you out!
This is the first of a series. The next one is tentitive for June 4th, followed by June 25th.
Space is limited so post here only if you can confirm 100% that you can make it I’ll put you on the list.
Anyone interested in taking a basic class on welding? It includes a practical teaching session with a handout, demonstration and if you’re not totally incompetent - some practical.
It’s hosted by HADA and Diamond Auto Fab and is free of charge. HADA hosts a number of Tech Session over the year designed to give people not used to working on cars some practical experience before attempting any big jobs on their own. So far this year we’ve disassemble a wrecked race car, swapped a motor, did a complete brake upgrade including larger rotors, mc, booster, SS lines and a full suspension swap. Next lesson…welding.
It’s on Sunday May 28th at 11:00 at Diamond AutoFab in Pickering.
The address is:
1031 Brock Road, in Pickering. (NOT Brock street in Whitby, about 10 minutes away)
Directions:
401 East to Brock RD, Go south about 1/2 KM. 1031 is on the East side of Brock RD the place is next to the Hertz car rental. The shop is temporarily at Marcus Car Care (until new unit is ready in late 2007).
We’re looking at only 15-18 people per session.
If you have any problems call Steve at: (416)561-4566
If you can beg, borrow or steal a welding mask then do so. Otherwise, attend with at the very least a pair of safety glasses. There will be spares but not many. If you have spares, then bring them.
Hope to see you out!
This is the first of a series. The next one is tentitive for June 4th, followed by June 25th.
Space is limited so post here only if you can confirm 100% that you can make it I’ll put you on the list.
Anyone interested in taking a basic class on welding? It includes a practical teaching session with a handout, demonstration and if you’re not totally incompetent - some practical.
It’s hosted by HADA and Diamond Auto Fab and is free of charge. HADA hosts a number of Tech Session over the year designed to give people not used to working on cars some practical experience before attempting any big jobs on their own. So far this year we’ve disassemble a wrecked race car, swapped a motor, did a complete brake upgrade including larger rotors, mc, booster, SS lines and a full suspension swap. Next lesson…welding.
It’s on Sunday May 28th at 11:00 at Diamond AutoFab in Pickering.
The address is:
1031 Brock Road, in Pickering. (NOT Brock street in Whitby, about 10 minutes away)
Directions:
401 East to Brock RD, Go south about 1/2 KM. 1031 is on the East side of Brock RD the place is next to the Hertz car rental. The shop is temporarily at Marcus Car Care (until new unit is ready in late 2007).
We’re looking at only 15-18 people per session.
If you have any problems call Steve at: (416)561-4566
If you can beg, borrow or steal a welding mask then do so. Otherwise, attend with at the very least a pair of safety glasses. There will be spares but not many. If you have spares, then bring them.
Hope to see you out!
This is the first of a series. The next one is tentitive for June 4th, followed by June 25th.
Space is limited so post here only if you can confirm 100% that you can make it I’ll put you on the list.
I was asked why it’s free and what’s the catch? Steve at Diamond AutoFab approached HADA some time ago about becoming a sponsor. Steve’s opening up a new shop next year and this tech session is a chance for him to meet face-to-face with our members and demonstrate his skills. The issue is I’m having trouble filling up spots since our season has already started and a lot of teams are already on the road or out of town this weekend. Steve is volunteering his time and donating the equipment. HADA is run by volunteers so there’s no cost incured on our end. I just decided to open it up to other clubs so none of the spaces don’t go wasted.
Anyone interested in taking a basic class on welding? It includes a practical teaching session with a handout, demonstration and if you’re not totally incompetent - some practical.
It’s hosted by HADA and Diamond Auto Fab and is free of charge. HADA hosts a number of Tech Session over the year designed to give people not used to working on cars some practical experience before attempting any big jobs on their own. So far this year we’ve disassemble a wrecked race car, swapped a motor, did a complete brake upgrade including larger rotors, mc, booster, SS lines and a full suspension swap. Next lesson…welding.
It’s on Sunday May 28th at 11:00 at Diamond AutoFab in Pickering.
The address is:
1031 Brock Road, in Pickering. (NOT Brock street in Whitby, about 10 minutes away)
Directions:
401 East to Brock RD, Go south about 1/2 KM. 1031 is on the East side of Brock RD the place is next to the Hertz car rental. The shop is temporarily at Marcus Car Care (until new unit is ready in late 2007).
We’re looking at only 15-18 people per session.
If you have any problems call Steve at: (416)561-4566
If you can beg, borrow or steal a welding mask then do so. Otherwise, attend with at the very least a pair of safety glasses. There will be spares but not many. If you have spares, then bring them.
Hope to see you out!
This is the first of a series. The next one is tentitive for June 4th, followed by June 25th.
Space is limited so post here only if you can confirm 100% that you can make it I’ll put you on the list.
I was asked why it’s free and what’s the catch? Steve at Diamond AutoFab approached HADA some time ago about becoming a sponsor. Steve’s opening up a new shop next year and this tech session is a chance for him to meet face-to-face with our members and demonstrate his skills. The issue is I’m having trouble filling up spots since our season has already started and a lot of teams are already on the road or out of town this weekend. Steve is volunteering his time and donating the equipment. HADA is run by volunteers so there’s no cost incured on our end. I just decided to open it up to other clubs so none of the spaces don’t go wasted.
Anyone interested in taking a basic class on welding? It includes a practical teaching session with a handout, demonstration and if you’re not totally incompetent - some practical.
It’s hosted by HADA and Diamond Auto Fab and is free of charge. HADA hosts a number of Tech Session over the year designed to give people not used to working on cars some practical experience before attempting any big jobs on their own. So far this year we’ve disassemble a wrecked race car, swapped a motor, did a complete brake upgrade including larger rotors, mc, booster, SS lines and a full suspension swap. Next lesson…welding.
It’s on Sunday May 28th at 11:00 at Diamond AutoFab in Pickering.
The address is:
1031 Brock Road, in Pickering. (NOT Brock street in Whitby, about 10 minutes away)
Directions:
401 East to Brock RD, Go south about 1/2 KM. 1031 is on the East side of Brock RD the place is next to the Hertz car rental. The shop is temporarily at Marcus Car Care (until new unit is ready in late 2007).
We’re looking at only 15-18 people per session.
If you have any problems call Steve at: (416)561-4566
If you can beg, borrow or steal a welding mask then do so. Otherwise, attend with at the very least a pair of safety glasses. There will be spares but not many. If you have spares, then bring them.
Hope to see you out!
This is the first of a series. The next one is tentitive for June 4th, followed by June 25th.
Space is limited so post here only if you can confirm 100% that you can make it I’ll put you on the list.
I was asked why it’s free and what’s the catch? Steve at Diamond AutoFab approached HADA some time ago about becoming a sponsor. Steve’s opening up a new shop next year and this tech session is a chance for him to meet face-to-face with our members and demonstrate his skills. The issue is I’m having trouble filling up spots since our season has already started and a lot of teams are already on the road or out of town this weekend. Steve is volunteering his time and donating the equipment. HADA is run by volunteers so there’s no cost incured on our end. I just decided to open it up to other clubs so none of the spaces don’t go wasted.
