BIG REDS wanna be Nick Cage Build thread.

Car looks amazing bro, sickest build on here for sure.

I got the new speedo gear installed, started the car for the first time since the drivetrain rebuild. No more throw out bearing noise, transmission shiftes great and the speedo works finally! However I was getting quite a bit of noise from the rear end, after some further diag. I found the passenger side axle bearing is very tight which I think is the cause of the noise. Ill drop by the machine shop on the way to work tomorrow to get a new one pressed on.I also started some underhood work, originally the front light harness came though the firewall and ran along the top of the inner fender, I removed it un-loomed it, inspected/cleaned the wires, re-wapped it and ran it along the outer frame rail. Eventually I will be hiding all of the underhood wires so this is just the start.

excuse the dust
http://img21.imageshack.us/img21/8343/img3400hs.jpg

http://img339.imageshack.us/img339/7334/img3401f.jpg

I will also be hiding the coil, but I have to go to the steel place to get some metal to make a new bracket.

http://img684.imageshack.us/img684/59/img3405ms.jpg

I will be removing this bracket as well, that is where the washer bottle was originally.

http://img696.imageshack.us/img696/4883/img3406x.jpg

the passenger side has quite a bit to hide so thatll be another day.

http://img694.imageshack.us/img694/2681/img3407ns.jpg

Brap brap

thats your word of the week huh?

more detail stuff/wiring today

interior courtesy lights hooked up

Instead of splicing up the wiring harness to power accessories ( tach,radio,ext, ext) I added a fusebox on the back of the firewall to power stuff.

I also got the tach/shiftlight wired up and working

That huge tach was in the movie?

yup…with the man himself

well thats kindof upsetting

Yea I dont think I would have installed that

Just clamped on right? Could easily be removed. But this is a movie clone car GUISE

Hope you wind this bitch out till it hits fuel cut

Ohhhh wait that was the GLI

def glad you installed the tach! looks good!

man this car is gorgeous, who painted it cause im looking for someone to do a paint scheme for my foxbody.

vintage motorsports in malta

At first I was iffy myself about installing it. but being that the car doesn’t have a factory tach it is kind of nice to know.

back seat all done

folded down(where it will be most of the time)

http://img845.imageshack.us/img845/7530/img3415n.jpg

http://img17.imageshack.us/img17/7161/img3416vi.jpg

folded up

http://img856.imageshack.us/img856/4383/img3417.jpg

what was the normal position for the movie???jw is all

So clean!

down.

got the seats back in today

http://img233.imageshack.us/img233/2412/img3421x.jpg

hope to never need it but it never hurts to have this too

http://img20.imageshack.us/img20/764/img3423h.jpg

also swapped out the rear leafs for new stiffer 1.5 in drop leafs

new on top old on the bottom

http://img269.imageshack.us/img269/4486/img3424l.jpg

and I got her back on her feet after being on jackstands for 3 months, even though I have jack it back up anyway it was nice to get it out in the sun again even if it is all dusty.

http://img22.imageshack.us/img22/6647/img3427t.jpg

http://img827.imageshack.us/img827/9582/img3428b.jpg

Car is so badass