Coreys s2000 build

[Corey_Maurer]

@JSEnclosures

You need to be of the “Jdm” race or small child to fit into those seats

Better start a diet!

@Eatonualive

is there any way to get that wavy part of the front bumper straight? you can rly see it when it reflects the ic

Thanks for pointing that out, hadnt noticed it till you said something

@KrazyKid

yep.

scuff the backside of the bumper cover along the edge of that spot and in about 2 inches with 80 grit.

spend $53 on a tube of GOOD panel bond.

get 2 pieces of 1X1 .125 wall aluminum square tube how ever long that flat section is wide.

scuff ONE face of ONE tube with 80 grit.

Tape the paint off on top

Panelbond the scuffed face on the tube to the scuffed face on the bumper cover. Take the second tube position it exactly over the one your gluing to the under side and clamp it down evenly in a few spots. let it sit over night or how ever long your shit says it takes to FULLY CURE.

unclamp and enjoy.

Square tube, NOT flat bar. flat bar wont resist the twisting like a tube.

Thanks for the advice Mike! What would you reccomend for panel bond?

@AVB

Price you pay for looks. I would only rock bride or recaro but to each there own

TechnoCraft are uber baller