Does anyone on here own an Obd2 swapped b series civic???

NYSpeed Automotive
1

I recently swapped a 98 gsr into my 98 civic ex coupe. The car wont start and it has to be something with a sensor or two. If anyone on here has an obd2 gsr, b16, b18, swapped Ek (96+) honda civic, please let me know. I just need someone to swing out here so i can take a look at how a few things were done. Im in west seneca and will give someone gas money for their time if they can help me out.

Thanks,

-Mike

2

your going to have to do a ckf sensor fix

3

http://kosmo.homedns.org/trey/6gen/

on here it says to take the clip from the civic and wire in on and thats what i did for it.Still wont fire up tho

4

well you must be doing something wrong, read it again.check your stuff

5

I have checked everything man. I wired everything the way I have researched. Im lost.

6

is it getting fuel?

7

it the ECu pluged in?

8

yes I dont want to keep trying to start it either because its flooding the motor lol

no i forgot…of course its plugged in lol.

9

its getting fuel and spark but wont fully turn over.

10

for real i swaped a motor once and it took me 2 days to find out the ECU was not pluged in

11

if its flooding spry WD40 in there

12

dont worry about that,it sounds like your lost man. i would come over and help you but i really have no time.im sure its a really simple think your looking over.pm don.give him money.he will have it goin

13

lol no thats one of the first things that i swapped.

14

he pretty busy right now and i called the poor guy when he was sleeping last night lol. Hes already been here to check the car out the other night. I told him the story and its kinda confusing to everyone right now.

15

your sure you did the cfs correct?

16

did you do anything to the motor? or just a swap over??

17

I did it exactly the way it said it should of been done. The integra sensor is slightly smaller on the block and is a 2 wire (white and blue) so the sensor clip on the harness didnt fit it.

I cut the clip off the block and wired the senor clip from the civic block on 3 wire (white black and blue).

After I did that the sensors fit perfect. I just taped off the extra black ground wire.

18

just swapped a 98 gsr integra full swap into my 98 civic EX coupe. used the civic wiring harness.

19

are you sure you are getting spark? you pulled all plugs out?.. and same with gas can you smell it?

20

thats what it told you to do?
if so than you must have over looked something
look here, i didnt feel like typing the whole thing.- Honda-Tech - Honda Forum Discussion