FS 1990 Coupe w/ SR20DET and Silvia conversion

Please contact me if you are interested in purchasing this vehicle.
John
(647) 895-3969
riexiner1660@rogers.com

Asking $14,800 CAD -FIRM

http://www.unitedmotionsupply.com/silvia/silvia.htm

I am a part owner of United Motion Supply Ltd and this was supposed to be my personal vehicle. I have personally hand picked (in Japan) and installed all the following JDM spec parts listed below, which are included with the vehicle sale. The engine has only been driven 2000kms since it was imported and is in great running order (compression tests are welcome). Currently, I’m upgrading to a Skyline GTR and must sell this vehicle due to lack of garage space.

I will NOT part-out this vehicle and it is to be sold as is.

• SR20DET engine (ribbed cylinder head) 90,000kms
• HKS EVC III boost controller
• Greddy Intercooler with hard lines
• Walbro fuel pump 255/LPH
• 3" Downpipe
• Buddy Club P1 racing wheels 17x9
• Tires: Yokohama GP Front 215 45 ZR 17 Rear: 235 45 ZR17
• 4 Piston callipers with slotted rotors (Skyline spec)
• 3” exhaust (steel) with Stainless muffler and 3” test pipe.
• APC BOV
• Apexi AFC
• Cusco suspension comp s coilovers
• Cusco strut brace (front & rear)
• Lightened flywheel
• Act clutch NS1HDSS
• LSD rear differential
• Fuel pressure delay module
• HKS air filter
• Upgraded radiator
• Oil filter relocation unit
• Greddy oil psi gauge
• Greddy oil temp gauge with memory.
• Greddy Vacuum gauge
• Razo shift knob
• Momo Steering wheel

I didn’t know they made Silvia’s LHD…

Looks like a USDM 240sx with a Silva Face Lift to me…

http://www.unitedmotionsupply.com/silvia/DSC02439.JPG

looks like a decent car, but why is there sideskirts only on one side?

i think people need to post RWHP and 1/4 times when selling cars like these.

i think that was an old picture put in… cause if you look on both sides have skrits.

Jibba jabba posts deleted. :squintnono:

Original subject changed to:

FS 1990 Coupe w/ SR20DET and Silvia conversion

to avoid misleading people

if i had the money man, sweet looking car, but they way the guages were mounted is struggles

i think that was an old picture put in… cause if you look on both sides have skrits.[/quote]

Ya sorry, that was an old picture. also, I haven’t even had a chance to take it to the track or get it on a dyno.

If the motor in your car is anything like the one you sold my cousin I wouldn’t post your car in this forum. You guys gave the worst warranty ever when it came to his motor! And you called me when you had problems putting your Sr in too! You sold us a motor with a bad ecu, water pump,coilpacks, etc, BUYERS BEWARE!!! thank god Varun got me all new stuff for my motor since UNITED MOTOR SUPPLY wanted to charge us for parts that should have been warrantied ! You should learn how to treat customers from Varun!

Water pump, coil packs, what the hell are you talking about? You had a problem with your cam sensor, I switched it for you, no questions asked (but do not mention that). I gave you free injectors; let you copy my hardlines, etc.

The last I heard your car was running fine, no water pump leaks, or electrical problems. If a ecu worked at the time of sale and the car was driving, how am I responsible? Buy an ecu from the dealer, see what warranty they give you when you install after market parts on it, if it works, it works. It’s an electrical part, not a wearing part. Besides, how long after the sale did this all occur?

About the coils and the water pump, nothing was ever mentioned to me. I don’t think you fully understand what modifications can and will do to a car. Warranties on performance engines can be given and in your case it was (cam sensor) but by no means will any company warrant a vehicle that is used for modification. Read post: FS: NOS kit (dry)with msd rpm control. NOS can explain an over heat, which will cause the coolant temp to go up, which in turn will cause leaks to occur and the MSD kit is wired into the ignition system, all it takes is improper wiring to cause a short. Parts warranty is on the part, not customer abuse.

Let me know what you think, call me; I would enjoy speaking with you about it.

P.S. I guess you are gonna have a hard time selling your truck with one of our engines in it, how bad is the engine now? I personally think his comments may be spawned by his selling relationship with Varun. Always be weary of people who knock others when they themselves have business to be gained.

View his post: subject: FS: 91 Nissan Pick up truck w/SR20det swap
Thanks, John R

Fine I’ll let other people comment on the service of your company. Did you forget bought we bought 2 motors and I don’t have time to argue over parts that under a few months went bad!! the ecu never worked properly but I didn’t make a big deal over it! you wanted to charge me, I got another one from a FRIEND! water pump went bad your partner said it was not covered under warranty! got one from a FRIEND! You know after awhile you just find it pointless to request something when you get no postive answer. You guys were so helpful right up to the point of warranty. Yes you did replace the cas BECAUSE it was cracked at the point of sale and it was visible!!!YOU DID NOT REPLACE THE COILPACK I GOT IT FROM A FRIEND! and another FRIEND gave me 4 brand new ones anyhow! Go figure . YOU let me copy your intercooler lines…whoa oh thank you, after dropping $5400 on 2 motors, you better let me copy them, and what you sold me 2 clips? with NO BODYPARTS,SUSPENSION,YOU REMOVED ALL ELECTRONICS AND MISC GAUGES BUT OF COURSE WANTED TO CHARGE EXTRA FOR THEM. Ernest (your partner stated “we are a small company and really can’t afford to do refunds”, thats what he told a guy I know that bought rims from United and told him he could get them fixed for $400 from rimtech…All lies we know the guy at rimtech and said he never quoted that price then when we asked for a refund the answer was NO, even though 3 others were standing right there when Ernest said he would no doubt refund it!! My NOS kit was never installed in my truck, my truck barely holds down stock psi? Almost everyone that kows me saw my truck and knows it runs all stock I have a boost controller but its not wired up and don’t say shit about my wiring skills YOU called ME when you couldn’t wire up that ride your selling Enough people can comment of my tech support for sr20 motors I troubleshoot like nobody I know (but alot of guys know their shit in this forum that I don’t know)! so don’t talk shit in the forum and make up stories but don’t worry I’ll be sure to contact others that have delt with your company and they will leave some feedback for you! I’m tired of this but like I said buyers BEWARE and alot of you guys know me so pm me if you want to know more! JOhn don’t bother pm’ing me! I heard enough B.S. from United motion supplyless!

Please answer these questions, thanks.

i would like to clarify that andy’s truck and the motor in his truck both run perfectly fine …we have changed his ignitor, coilpacks, injectors, water pump, ecu and various other small parts all around the motor and it now runs 100% mint…About the NOS thing…i work on andies truck and drive it all the time…its his frickin daily driver…nitrous hasnt even been anywhere near it…peace

Aight, take your personal discussion/beefs privately or elsewhere. :squint:

sr20_truck WTFbig-ass-paragraph :ugh:

Any further discussion not related to the sale will be deleted henceforth.

United Motion Supply Ltd = bullsh*t (Im the guy with the rims)