FS: Final Konnexion R32 RB25DET Skyline Show Car (403 WHP) *Picture Intensive*

Picture Gallery of the car for sale: http://www.pbase.com/suomyairsoft/finalkonnexionr32

Car is located in Vancouver BC Canada

Hey Guys & Gals,

Up for sale is my pride and joy of more than 2 ½ years. Most of you guys in the local Vancity area may already know of my car, or have probably seen it roaming around on the street, at car meets and car shows.

For those viewing this thread:

Please respect my post here and not ruin this thread. The asking price is what I feel is fair. This car was built with QUALITY. Gerrard, Paulo, and Steve at Keep Performance Lab have poured blood, sweat, and tears into this car. This is the one car that they built from the ground up.

  • Please refrain from posting comments about the asking price
  • If you can find something for cheaper, than go and contact them (you get what you pay for)

Brief History:

One thing that sets my R32 Skyline apart from the rest is the fact that this car was built in Canada. The car arrived untouched, no aftermarket modifications at all. Not even a shift knob. It was bone stock, and AUTOMATIC =)

In my opinion, this is one of the nicest R32 Skylines in Canada. Performance, exterior looks, interior condition, this Skyline has it all.

Unlike the majority of other Skylines for sale that came pre-modified, 99% of the parts purchased for this car were purchased BRAND NEW.

The only 2 parts on this car bought “used” were the coilovers and the roll cage.

Total Spent on Aftermarket Parts: $38,000 (Parts & Labour)
Total Receipts available: $30,000 (Parts & Labour)

The vehicle cost of $8,200 is not included in the costs listed above. The missing receipts are due to friendly hookups from people in the industry. Paintjob, Navigation deck, electronic performance items, some were purchased on a no receipt basis.

Reliability: My car is driven 10 out of 12 months in the year. Rain or shine, it is out on the road. The 2 months that it is garage stored is when it gets too cold and starts to snow; December to January.

Exterior Condition: 9/10

  • The reason why I would not give it a 10 is because the front & rear window moldings were not replaced. It’s almost not noticeable, but I am very picky with my cars. The paint and body kit fitment is a 9.5 / 10

Interior Condition: 10/10

  • Almost zero flaws. No dash bubbling, no broken vents. Very clean inside. No burn marks.

Engine Bay Condition (not mechanical condition): 9/10

  • There is probably not a Skyline out there with such a clean and empty engine bay as mine. The engine wires have mostly been tucked, hidden fuse box, removed hicas hardware and lines. The reason why I would not give it a 10 is because the paint under the hood is a little scared in some places from the swap. Otherwise, it is MINT.

Aircare: YES, the car does pass aircare with eaaaaaaaaase. But, you must put in the high flow cat that I will provide you. That’s all you have to do.

Right now, the car is running 3inch straight pipe all the way through from the turbo to the can.

The cat can be put on and taken off within 10-20minutes.

LIST OF MODIFICATIONS

Car Make: Nissan
Car Model: R32 GTS-T Chassis
Power Options: Power Windows, Power Mirrors, Power Door Locks, Power Steering, Air Conditioning, Rear Window Wiper, and among others I might have missed
Mileage: 96,xxx KM’s

Engine & Driveline:

Dyno’d & Tuned by Kinetic Motorsports: 402.8WHP @ 14PSI / 1 Bar (Currently using 1 Bar wastegate spring)

RB25DET Swapped from an 1994 R33
MINES Tuned 300ZX Z32 TT ECU
ATS Twin Plate Carbon Type R Clutch

  • Keeplabs Reinforced / Welded Clutch Pedal Bracket
    Aeromotive Fuel Pressure Regulator
    Aeromotive Liquid Filled Fuel Pressure Gauge
    Greddy Hi Polished Intake Manifold
    Greddy External Oil Catch Can
    HKS SSQV BOV
    HKS Type S Front Mount Intercooler
    Genesis Racing Battery
    Garrett GT30R Ball Bearing Turbo Hi Polished
  • GT30-11 with a .64 A\R
    SPLITFIRE Ignition Coil Packs
    Tial Wastegate 38mm
  • Externally Dumped with Custom Screamer Pipe
    Tomei Short Shifter
    Custom Top Mount Stainless Steel Exhaust Manifold
    Kinetic Motorsports 440CC Injectors
    Keeplabs Custom made Billet Top Feed Fuel Rail
    Keeplabs Custom 90mm Q45 Throttle Body
    Keeplabs Custom made One Piece Driveshaft
    Keeplabs Custom made full Intercooler Piping
    Keeplabs Custom made 3” Downpipe (Heat Wrapped – 1 02 bung, 1 extra bung for Wideband)
    Keeplabs Full AN Fittings,
    Keeplabs Custom Stainless Braided Fuel System
    Keeplabs Custom made “Dropped Down” Aluminum Battery Tray
    Keeplabs Custom “Hidden” Fuzebox
    Keeplabs Custom “Hidden” Z32 Air Flow Meter (Looks like it’s running Standalone with NO AFM)
    Keeplabs Custom Fender Wire Tuck (Prevents shredding wires due to extremely low ride height)
    Keeplabs Custom made Turbo Inlet Pipe w/ K&N Race Filter
    Keeplabs 3" Stainless Steel Catback Exhaust
  • 3 Inch Straight Through From Turbo
    Walbro 255 Fuel Pump
    Wonder Hicas Eliminator
    Removed: Hicas and All Associated Lines / Hardware

Suspension & Wheels:
ESSENTIAL Subframe Metal Bushings
Tein HA Coilovers (Can be substituted for 5000km new Cusco Zero-2 Coilovers; trade + cash)
Mines Front Strut Bar

WORK VS-KF

  • Custom Rivet Color (Black)
  • Custom Gold & Black WORK Centre Cap
  • 17x10 front
  • 18x10.5 rear
  • Kumho Ecsta SPT
  • 225/45/17 Front
  • 235/40/18 Rear
    WORK lugnuts
    WORK Valve Stem Caps

Electronics & Interior:

Apex’i SAFCII

  • Keeplabs Custom Mounted in Glovebox
    Apex’i AVC-R Boost Controller
  • Keeplabs Custom Mounted in Glovebox
    Compustar Pager Alarm System ( Immobolizer + other goodies)
    CUSCO Safetly 21 7 Point Roll Cage
    DEFI BF Series Boost Gauge
    DEFI BF Series Oil Pressure Gauge
    DEFI BF Series Water Temp Gauge
    DEFI Controller Unit II
  • Keeplabs Custom Flush Mounted in Dash
    Focal Speakers All Around
  • Doors and Rears
    JIC MAGIC Red Alcantara Seats (x2)
  • Momo Sliders (x2)
  • Keeplabs Custom made Low Mounting Brackets (x2)
    Pioneer AVIC-D1 Navigation
    Takeda Custom Black Leather / Red Stitching Shift/E-brake Boot
    Nardi Perferated Leather “DeepCorn” Steering Wheel
    Nardi Classic Shift Knob

Body/Exterior/Lighting:
BlitzGear Pin Stripe Graphics
BlitzGear “Keeplabs” Crest Graphics
PRIME HID Kit 7000K
Paint Job Color: Tri-stage Alsa Corp Ice Pearl Black
Keeplabs rolled / pulled fenders

  • 30+ mm over
    Final Konnexion First Contact Front Bumper
    Final Konnexion First Contact Side Skirt
    Final Konnexion First Contact Rear Bumper
    GTR Aluminum Hood
    GTR Grill

Asking Price: $32,500CAN
Contact:: Via PM or wong.will@shaw.ca

Parting Out: At this moment, no parting out. If an interested buyer does not want the following, I can adjust the price: JIC Seats (seat, rail, and mount), Pioneer AVIC D1 Navigation, Nardi Steering Wheel, WORK VS-KF wheels.

Stock pieces would be replaced if the parts are removed.

Trades; Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES. Absolutely NO TRADES.

http://www.pbase.com/suomyairsoft/image/49889675.jpg

Exterior

http://www.pbase.com/suomyairsoft/image/67910561.jpg
http://www.pbase.com/suomyairsoft/image/69820398.jpg
http://www.pbase.com/suomyairsoft/image/62522097.jpg
http://www.pbase.com/suomyairsoft/image/62522018.jpg
http://www.pbase.com/suomyairsoft/image/66673186.jpg
http://www.pbase.com/suomyairsoft/image/67903017.jpg
http://www.pbase.com/suomyairsoft/image/67903010.jpg
http://www.pbase.com/suomyairsoft/image/48093350.jpg

Interior

http://www.pbase.com/suomyairsoft/image/67902985.jpg
http://www.pbase.com/suomyairsoft/image/48093352.jpg
http://www.pbase.com/suomyairsoft/image/67902990.jpg

Engine

http://www.pbase.com/suomyairsoft/image/67902965.jpg
http://www.pbase.com/suomyairsoft/image/66673207.jpg
http://www.pbase.com/suomyairsoft/image/55544039.jpg
http://www.pbase.com/suomyairsoft/image/43554409.jpg
http://www.pbase.com/suomyairsoft/image/43554408.jpg
http://www.pbase.com/suomyairsoft/image/43554407.jpg
http://www.pbase.com/suomyairsoft/image/43554410.jpg
http://www.pbase.com/suomyairsoft/image/43554406.jpg

Misc Pictures:

The very beginning:
http://www.pbase.com/suomyairsoft/image/33928026.jpg

Mid swap:
http://www.pbase.com/suomyairsoft/image/42053851.jpg

Old Paint & Rims:
http://www.pbase.com/suomyairsoft/image/44830212.jpg

Day I got my rims:
http://www.pbase.com/suomyairsoft/image/47471562.jpg

Great looking car! Great looking paintjob and styling! Best of luck with the sale!

ps. In the future when posting ads, you should try to avoid the few words that start contraversy. (ie. best, kill. Be modest!) I would agree with a lot that you’ve said, but not everyone is like me! Best of luck once again!

–Gabe

will’s car is the BEST, how many cars like this do you know of Aussies and Kewi’s raving over? And they do.

the car is teh sex, you can tell by all the panties on th rearview mirror

Hey BMWWW, thanks for the tip!

I guess I am overly passionate about the car, but who wouldn’t be with their own? :slight_smile:

But to be honest, I do believe this is the finest example of a well built Canadian Skyline.

There are many nice R32’s across the country, I just feel this one is the most well rounded.

If you guys ever get a chance to visit Vancouver, you would understand the amount of bone stock, pieces of crap Skylines roaming the streets. I think we may have the highest concentration of R32’s in the country, and I would say 80% of them running around are in very poor condition.

oh rly? hahaha…

the price of skylines is prob cheaper in van?.. in tdot it’s pretty high b/c were so far out.

^^^ It’s not as bad as you think here. Really it’s only about 1000 more for a skyline here as opposed to west coast.

I’m a bit confused, you’ve posted this as a ’ Final Konnexion R32’… which is a Japanese company most famous for it’s vert FC3S show car… but this was built in Canada by what seems to be a company called ‘Keep labs’…??

You have a valid question.

I guess it really comes down to interpretation of the “For Sale” title.

Most people, including you, can deduce the fact that the car was built here in Canada by Keep Performance Lab by reading the long winded description I’ve made :p. So you shouldn’t be confused about who and where the car was built.

I have advertised this car on dozens of online forums, BuySell, Autotrader etc.

One thing I know is that first impressions and descriptions are very important.

I tried to be as descriptive as possible with the title to generate higher traffic.

No attempt was made to pass this car as an official FK car.

But, in my opinion, my car looks waaaaaaaaaaay better than that gawdy looking “Big Bird” FK uses in their promotional pictures.

I am pretty sure if the next owner of this car submitted it to Final Konnexion, they would most likely authorize it as it’s North American show car if they ever decide to market outside of Japan :R

I hope this answers your question.

Yes, me labelling the FS title with “Final Konnexion” in it, is to explain that the car has a full FK kit. Pretty rare kit in Canada btw :wink:

hello he’s tryna sell a car stop chatting it up. leave the thread be for people interested in buying the car please and thank you.

doubtless if the seller was upset he’d have said something right away… but I’m sure he appreciates your attempt to control the situation for him… :R

ok guys for sale not for chat. only try and keep this to questions about the car Only if you interested in buying it other than that keep it to pm thanx.

Due to some financial obligations, I am entertaining an offer of $27,000 for the car from a potential buyer. It will include the stock GTS-T seats instead of the JIC ones.

If you want to make a higher offer please email me at wong.will@shaw.ca

Thanks guys!

Bump

wong.will@shaw.ca

Bump. Asking price has been dropped to $28,000CAD

Please email me at wong.will@shaw.ca

georgeous car. good luck with the sale.

Great car! My heart was beating faster.:slight_smile: Good luck!