header install -specV

[PyreXXX]

Actually, that’s not the one you need to plug. You need to put the spacer in the o2 sensor on the midpipe UNDERNEATH the car.

I’m assuming that you have an 02-03 car, which has 3 o2 sensors. If you plug the spacer into the one in the midpipe, your SES light should go off and stay that way.

[jutes]

@PyreXXX

I’m assuming that you have an 02-03 car, which has 3 o2 sensors.

what.

[Blackout-Spec]

LOL i dont have a cat in my midpipe. no ses so far…

and if i get a header then what?

[PyreXXX]

This is interesting. Could it possibly be a blown fuse?
http://forums.thevboard.com/viewtopic.php?t=83047&highlight=ghetto+sim

I thought I remembered the 02-03 cars coming with 3 o2 sensors - but now I can’t find the specific thread on the Vboard to back it up. Oh well!

[Last_Fuse]

@PyreXXX

This is interesting. Could it possibly be a blown fuse?
http://forums.thevboard.com/viewtopic.php?t=83047&highlight=ghetto+sim

I thought I remembered the 02-03 cars coming with 3 o2 sensors - but now I can’t find the specific thread on the Vboard to back it up. Oh well!

I’ve got some questions:

1. Why the heck would you need 3 o2 sensors? (I know one for MAF, one for cat-converter but the 3rd? you dont have 2 down pipes like a V6 or anything…)
   2)Is the Ghetto Sim just a signal says the cat-converter is working?

[jutes]

@Fallen

1. Why the heck would you need 3 o2 sensors? (I know one for MAF, one for cat-converter but the 3rd? you dont have 2 down pipes like a V6 or anything…)

The third is to control the mad Vtak.

[Last_Fuse]

@jutes

[quote=Fallen]1) Why the heck would you need 3 o2 sensors? (I know one for MAF, one for cat-converter but the 3rd? you dont have 2 down pipes like a V6 or anything…)

The third is to control the mad Vtak.[/quote]

I see we cant answer simples questions again…

[PyreXXX]

1. I have no idea. Ask Nissan what the freakin’ deal was, they are the goofballs!

2. The Ghetto-Sim just pulls the sensor out of the exhaust stream, making the sensor read as though the exhaust gas is cleaner than it really is.

[Last_Fuse]

@PyreXXX

1. I have no idea. Ask Nissan what the freakin’ deal was, they are the goofballs!

2. The Ghetto-Sim just pulls the sensor out of the exhaust stream, making the sensor read as though the exhaust gas is cleaner than it really is.

Heh, thanks

[jutes]

There are only two sensors on the Spec-v’s. On the 04-06’s, the second sensor is on the midpipe while on the 02-03 it is on the exhaust manifold.

[Invalid_Zero]

@PyreXXX

I’m assuming that you have an 02-03 car, which has 3 o2 sensors.

Put down the crack pipe. :lol: There’s only 2 and they’re both on the exhaust manifold.

I don’t know what everyone is bitching about SES lights for. When I had my header the #1 02 sensor was in the header and I relocated the #2 to behind the second cat on the mid-pipe. Ran like that with no ghetto sim, no nothing for a year and a half with NO SES lights.

[PyreXXX]

OK, nm. At my age one is liable to get easily confused!

[03_SunBurst_V]

You may have to “double stack” your secondary 02 sensor with another spacer (screw the spacer into the header, and screw another spacer into the spacer).:?

Some people have had to do this before, maybe you’re one of those unlucky ones.

Try it and see if it works.

[speedworxs]

maybe i should get one of you guys to look at it.
i am not even sure if i have the room to put a second spacer on the O2 sensor before they connect with the fan housing…

[MrRage]

You should be fine… Let one of use SPec V guys know… We’ll make it fit :E