Its about time! **pix inside**

just an update…

Motor is in (obviously)
MPH 4" power pipe was smoothed and polished and installed.
42 lb. injectors installed (thanks NYStanger)
bpv and misc hoses plumbed
Had the alternator polished
Caster Camber plates polished and installed.
flex rad hose installed
all fluids are in…
and a few other things here and there…

also went with a centerforce dual friction clutch and 11" flywheel…so those are in…obviously.

left to do…

put the SCT maf and filter on (have to wait for the front bumper to go back on)
pull the tank and pump…
install new tank and dual cobra pumps (will have them next week)
install the modded FPDM, and KB 40 amp Boost a pump (already have those)…get a handhelp sct, load the base tune and breack that bitch in…

dyno tune is on the 23rd or may! yippie!

oh and the intercooler is going to have to wait until later this summer or next winter…im about broke on this damn project.

here is some pics…i still have a ton of cleaning to do =(

http://i9.photobucket.com/albums/a72/frogiiie/enginenew2001.jpg
http://i9.photobucket.com/albums/a72/frogiiie/enginenew2002.jpg