any link that would help or info would be great thanks!
if you don’t know what you’re doing…may I suggest getting it done. If improperly shimmed kiss your tranny goodbye.
thanks for the advice but im sure i can figure it out (hopfully) with a point in the right direction. anyone elso with a link. thanks again
Have you checked H-tech?
Its not hard at all.
http://www.honda-tech.com/zerothread?id=795700
pics are down though…
other than that just use your helms.
very very very detailed writeup…OK, you don’t have to be that crazy when you install it man…just be sure to get the shimming part correct and you’re good to roll.
it’s really not that hard, what lsd are you installing? the newer obx lsd’s arent as far off as the first and second gen, most people are saying they don’t even need to add any oil rings to shim…
my suggestion with any project like this is to take lots and lots and lots of detailed photos, and if you plan to do more of these diy’s get yourself a helms from helminc.com
[quote=“ieatpaint315,post:7,topic:38413"”]
most people are saying they don’t even need to add any oil rings to shim…
[/quote]
oil rings??? you shim the diff with shims (and you can order all sorts or different thicknesses)
Bseries oil rings, i’ll find the thread when i get home, honda tech is too big for my phone.
it might just be my computer but the pics dont show up just x. thanks alot guys and i have a helms but it dosent say shit. Keep it coming!
[quote=ieatpaint315;731867]http://www.honda-tech.com/zerothread?id=795700
pics are down though…
^^^^^
didnt see that
oya its a quaife
wow andy learns something every day lol
yea, and it seems as though 9/10 times that it’s the perfect size…