ok so i have this problem where my lights dont work.
my head lights work, turn signals and break lights all work
but my dtrl’s, side markers and ilumination in my cluster and dash does not work
now i checked all mu fuses etc etc
and some time while im driving if i hit a bump or slam my door they will turn on.
it there a relay or somthing that controls this?
I had a similar problem. When I was driving my headlights and cluster would turn off and on at random, which was caused by a bad starter switch.
any one ?
90?
by the fuse box on the drivers side ull see a white box. its ur chime box.(we’ll call it that) if that goes ur interior lights wont work.
the chime box when ur door is opened?
or the rectangular box?
its about 3x3" small bracket off to the side
or maybe the plug is lose on the cluster? sr swap?
3X3 box with a 10MM screw though it
its your TCU. might of burnt it out. if it is the prob i can fix it for you for free just come on by.(im in barrie)
it gets commonly fried when installing an aftermarket CDplayer. just touching the wrong wire will cause a power arc in this stupid box and somethings can get burnt out.
on mine it was just the dashlight. for some guys it burns out the DTRL and wiper… ect. it controls alot of the shit on your dash.
ok yea that is it then
it just hanging there
ill take it out and see
check that
youll want to open it(it looks easy but its not, i was gentle at first then learned with care it will take a beating…and needs one to open)
look for dark spots that almost seem burnt. iff u see a line thats burnt the connect the pins with verythin wire and very little solder.
or replace it
if u need one i got one u can have.
if you just put a cd player in it could be the orange wire with a black line i think it says ilumination on it i believe its orange or orange with black you need to cut the tip off and tape or cap it up i know if to touches any metal the lights go. it happened to me once.
I would say its ur dimmer switch…
ok guys i still have this problem
i replaced the TCU and turn signal assembly
and still no tights?
what else can i check
could it be a relay or the dimmer switch
any one?
Have you considered maybe a bad ground connection??
Adam