Here are the brackets that i made to mount the car on the rotisserie. It’s a 4X4X.375 wall tube. I drilled holes and welded some nuts to the outside to lock it. The inside is shimmed so it appropriately matches the outside of the main rotisserie tube. Perpendicular is a 1 1/4 SCH40 pipe that inserts into the bumper shock holes.
OK. The blaster was having some troubles with the wheel wells, so i came and ground out the heavy stuff so they can blast the rest off.
To get an idea of what the underbody looked like before it was blasted (i had already scraped a lot at this point):
YUCK!
Here is what it looked like when i showed up. You can still see that the wheel wells are more or less untouched:
PRETTY!
Then i used a wire wheel and a pistol grip sander to remove most of the rubber in the wheel wells. This shit was almost 1/8" thick in spots!!!
