Hood still clears:
Don’s seal of approval:
1/2 of the brains of the operation:
Plenty of room for the GT35R. You can see the chassis mount and the engine mount. This is very similar to how an RB mounts in a 240. Making custom mounts is going to be simple. Probably going to use solid mounts.
Christ, there’s even plenty of room over here for another one. :snky: jk. 
Well, i don’t have a picture of it, but there is no way in hell that the downpipe is going to clear the steering shaft. Also, that’s not the side of the car exhaust is meant to go down. The solution? Custom transmission tunnel/exhaust passage.
The rb26 transmission is definitely taller than the OEM unit, so the tunnel will need to be modified for that alone, well, we are also going to bring it up extra high across the firewall allowing us to route the exhaust over the transmission and down onto the right side of the car. We made a rough mockup of what this will look like with a piece of cardboard. You can imagine the downpipe on a topmount turbo going up and over the valve cover, over the transmission and out the rear of the car.
From the inside, the modified tunnel should fit behind the dash where the heating unit used to reside:
For mounting the IC, I am thinking about getting this body kit from BMPdesigns:
That’s all for now. Any questions?