Power FC help - with pics

SON240sx Automotive
1

Got the pfc installed and was just wondering about a few things and settings. I can’t belive the diference, no traction in 3rd gear. Can’t wait to get a proper tune

gt2871r .64 stock boost (12psi)
D-werks 740cc injectors
z32 mafs

I have the injector correction set to 50% with a lag time of 0.00ms
370cc (.58ms) - 740cc (.60ms) = .02 (found 0.00 after searching) 0.00 seemed to have the best idle and throttle responce so far. I have no AC. Boost function is off and o2 feedback is off. My idle is about 850-900rpm (fixed issue with hunting idle), timming @ idle is 15 and injector duty is 1.2

Here are some of the numbers on the commander. Please tell me if any of these look off.

This one is while I was driving. The EAI was on and off

http://i3.photobucket.com/albums/y88/Awddrift/IMG_3484.jpg
IMG_3484.jpg800×600

This one is with the engine off and key on
http://i3.photobucket.com/albums/y88/Awddrift/IMG_3482.jpg
IMG_3482.jpg800×600

Do these look OK?
http://i3.photobucket.com/albums/y88/Awddrift/IMG_3481.jpg
IMG_3481.jpg800×600

and this one?
http://i3.photobucket.com/albums/y88/Awddrift/IMG_3480.jpg
IMG_3480.jpg800×600

http://i3.photobucket.com/albums/y88/Awddrift/IMG_3479.jpg
IMG_3479.jpg800×600

2

Hey Cody, sorry…my messanger is going wacky…I could see you typing but could not respond.

If you are driving the car now you are going to want to play with our WTR TEMP correction table. I suspect that when your water temp is below 80c you have a nasty little lean bog?

Also - where did you get a .60 lag time for Dwerks injectors?