I am going to hook up a R32 mafs on my S13 SR blacktop, but I can’t find the pin out. I did a search but couldn’t find it anywhere. Does anyone know the pin out or if the r32 mafs is hooked up the same way as the z32 mafs? Thanks
i have the r32 factory service manual and i got the pinout for the mafs message me and ill tell you the configuration
farmer
I assume you know your going to need some type of fuel control for the thing. And arent they only good to something like 350hp??
Z32 all the way
I have a safc II and z32 mafs. Im trying to sell an r32 mafs and I want to know how to hook it up.
Umm if it’s a MAF from an R32 GT-R it doesn’t even flow as much HP as a stock SR MAF.
remember that car came with TWO mafs… TWO… the air signal comes from both, one MAF only feed 3 cyl so it doesn’t require much to cover the car’s HP…
think of it this way… if the MAF is only good for 200hp, 2 of them do 400hp…
rb20/rb25 mafs good for about 320bhp.
This is how mine is hooked up wireing could be diffrent because I have the S15 motor but I am pretty sure there the same.
Hi,
Here is the pinout:
S15
Blue = Signal
Pink = Ground
Black/White = + 12 Volt
On the R33 GTS-T
Pin# 2 = Signal
Pin# 3= GND
Pin #4= GND
Pin #5 = + 12 Volt
(put the blue wire on the pin # 2 of the R33 MAF, Pink goes to the pin #3 & 4, and Black/White to the pin #5)